A
-
Acoustophoresis
Numerical Simulation of Same-sized Cells Focusing and Separation with Surface Acoustic Waves [Volume 32, Issue 1, 2020-2021, Pages 77-92]
-
Active flow control
Investigation of Suction Jet Parameters in Flow Control of Dynamic Stall [Volume 32, Issue 2, 2020-2021, Pages 181-200]
-
Adsorbent
Numerical and Experimental Investigation on the Parabolic Dish SolarConcentrator [Volume 32, Issue 1, 2020-2021, Pages 17-38]
-
Aerodynamics performance
Investigation of Suction Jet Parameters in Flow Control of Dynamic Stall [Volume 32, Issue 2, 2020-2021, Pages 181-200]
-
Aligned cooling towers
Thermal Performance Analysis of Natural Draft Dry Cooling Towers Based on New Theoretical Method [Volume 32, Issue 1, 2020-2021, Pages 191-210]
-
Aluminum seamless pressure vessel
Feed effect on strain and stress in dome forming (spinning) of a tube in an aluminum CNG vessel manufacturing [Volume 32, Issue 2, 2020-2021, Pages 43-60]
B
-
Ball Burnishing
Study on the effects of ball burnishing parameters and initial surface roughness on the core roughness characteristics of Copper cylindrical parts [Volume 32, Issue 2, 2020-2021, Pages 113-132]
-
Battery bank
Optimization of hybrid solar/wind/battery system with different prime movers (Diesel engine, Gas engine, Gas turbine) [Volume 32, Issue 2, 2020-2021, Pages 61-76]
-
Broadband shock-associated noise
Numerical Prediction of Near-field Noise and Return Acoustics from Sonic Jets in Different Operating Conditions [Volume 32, Issue 2, 2020-2021, Pages 19-42]
C
-
Cancer tissue
Numerical Study on the Thermal Stress caused by Laser Radiation on Healthy and Cancerous Skin Tissue [Volume 32, Issue 1, 2020-2021, Pages 59-76]
-
Casimir
Stability Analysis of Nano-wire Made Tweezers in Magnetic Flux [Volume 32, Issue 2, 2020-2021, Pages 149-164]
-
Cell Separation
Numerical Simulation of Same-sized Cells Focusing and Separation with Surface Acoustic Waves [Volume 32, Issue 1, 2020-2021, Pages 77-92]
-
CFD
Numerical Investigation of Darrieus Wind Turbine near a One-way Highway [Volume 32, Issue 1, 2020-2021, Pages 1-16]
-
CFD
Scaling of a Radial Turbine for Turbocharger of a Lean Combustion Engine [Volume 32, Issue 2, 2020-2021, Pages 165-180]
-
CFD simulation
Parametric study and numerical analysis of the regenerative compressor with symmetric aerodynamic blades, to improve performance [Volume 32, Issue 2, 2020-2021, Pages 1-18]
-
Choked nozzle
Numerical Prediction of Near-field Noise and Return Acoustics from Sonic Jets in Different Operating Conditions [Volume 32, Issue 2, 2020-2021, Pages 19-42]
-
Code-Aster
Finite Element Modeling of Laser Ultrasonics Process in Thermoelastic Regime [Volume 32, Issue 1, 2020-2021, Pages 133-152]
-
Collector thermal efficiency
Thermo-Economic evaluation of a solar dryer with evacuated heat pipe collector and energy storage [Volume 32, Issue 1, 2020-2021, Pages 39-58]
-
Consistent couple stress theory
Stability Analysis of Nano-wire Made Tweezers in Magnetic Flux [Volume 32, Issue 2, 2020-2021, Pages 149-164]
-
Core Roughness
Study on the effects of ball burnishing parameters and initial surface roughness on the core roughness characteristics of Copper cylindrical parts [Volume 32, Issue 2, 2020-2021, Pages 113-132]
-
Correlation
Presenting a Correlation to Obtain Natural Gas Leakage Rate from a Buried High-Pressure Pipeline in a Porous Media [Volume 32, Issue 1, 2020-2021, Pages 231-254]
D
-
Darcy-Brinkman-Forchheimer model
Heat Transfer of Nanofluid in a Channel with Magnetic Field and Porous Obstacle using the Darcy-Brinkman-Forchheimer Model in the LBM Method [Volume 32, Issue 1, 2020-2021, Pages 153-172]
-
Darrieus Wind Turbine
Numerical Investigation of Darrieus Wind Turbine near a One-way Highway [Volume 32, Issue 1, 2020-2021, Pages 1-16]
-
Dome forming
Feed effect on strain and stress in dome forming (spinning) of a tube in an aluminum CNG vessel manufacturing [Volume 32, Issue 2, 2020-2021, Pages 43-60]
-
Dynamic stall
Investigation of Suction Jet Parameters in Flow Control of Dynamic Stall [Volume 32, Issue 2, 2020-2021, Pages 181-200]
E
-
Edge Crack
Frequency Analysis of Cracked Porous Functionally Graded Beams on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 32, Issue 2, 2020-2021, Pages 93-112]
-
Elastic plate
Simulation of fluid flow in a heat exchanger with elastic intermediate separator at different working conditions [Volume 32, Issue 2, 2020-2021, Pages 77-92]
-
Electric field
Numerical Analysis of Magnetic Mixing Phenomenon in an Electroosmotic Flow between Two Parallel Plates [Volume 32, Issue 1, 2020-2021, Pages 174-190]
-
Electromagnetic instability
Stability Analysis of Nano-wire Made Tweezers in Magnetic Flux [Volume 32, Issue 2, 2020-2021, Pages 149-164]
-
Expanded metal sheet
Experimental and Numerical Investigation on Concrete Specimens with Expanded Metal Sheet under Impact Loading [Volume 32, Issue 1, 2020-2021, Pages 211-230]
-
Exponential FGM
Frequency Analysis of Cracked Porous Functionally Graded Beams on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 32, Issue 2, 2020-2021, Pages 93-112]
F
-
Fast filling
Determine the Optimal Algorithm of Priority Panel in CNG Refueling Station to Minimize Energy Cost [Volume 32, Issue 2, 2020-2021, Pages 201-216]
-
Feed
Feed effect on strain and stress in dome forming (spinning) of a tube in an aluminum CNG vessel manufacturing [Volume 32, Issue 2, 2020-2021, Pages 43-60]
-
Finite Element
Finite Element Modeling of Laser Ultrasonics Process in Thermoelastic Regime [Volume 32, Issue 1, 2020-2021, Pages 133-152]
-
Fluid flow rate
Thermo-Economic evaluation of a solar dryer with evacuated heat pipe collector and energy storage [Volume 32, Issue 1, 2020-2021, Pages 39-58]
-
Fluid Solid Interaction
Effect of Vanes Angles on the Flow around Fuel Rods and the Induced Vibrations by Analyzing Solid-Fluid Interaction [Volume 32, Issue 2, 2020-2021, Pages 133-148]
-
Fuel Assembly
Effect of Vanes Angles on the Flow around Fuel Rods and the Induced Vibrations by Analyzing Solid-Fluid Interaction [Volume 32, Issue 2, 2020-2021, Pages 133-148]
-
Fuel ratio
Optimization of hybrid solar/wind/battery system with different prime movers (Diesel engine, Gas engine, Gas turbine) [Volume 32, Issue 2, 2020-2021, Pages 61-76]
H
-
Heat exchanger
Simulation of fluid flow in a heat exchanger with elastic intermediate separator at different working conditions [Volume 32, Issue 2, 2020-2021, Pages 77-92]
-
Height of blades
Parametric study and numerical analysis of the regenerative compressor with symmetric aerodynamic blades, to improve performance [Volume 32, Issue 2, 2020-2021, Pages 1-18]
-
Heller
Thermal Performance Analysis of Natural Draft Dry Cooling Towers Based on New Theoretical Method [Volume 32, Issue 1, 2020-2021, Pages 191-210]
-
Homotopy perturbation
Stability Analysis of Nano-wire Made Tweezers in Magnetic Flux [Volume 32, Issue 2, 2020-2021, Pages 149-164]
I
-
Impact
Experimental and Numerical Investigation on Concrete Specimens with Expanded Metal Sheet under Impact Loading [Volume 32, Issue 1, 2020-2021, Pages 211-230]
-
Induced vibrations
Effect of Vanes Angles on the Flow around Fuel Rods and the Induced Vibrations by Analyzing Solid-Fluid Interaction [Volume 32, Issue 2, 2020-2021, Pages 133-148]
-
Integration
Semi-implicit Integration of Constitutive Equations with Non-linear Mixed Hardening [Volume 32, Issue 1, 2020-2021, Pages 111-132]
L
-
Laser
Finite Element Modeling of Laser Ultrasonics Process in Thermoelastic Regime [Volume 32, Issue 1, 2020-2021, Pages 133-152]
-
LBM method
Heat Transfer of Nanofluid in a Channel with Magnetic Field and Porous Obstacle using the Darcy-Brinkman-Forchheimer Model in the LBM Method [Volume 32, Issue 1, 2020-2021, Pages 153-172]
M
-
Magnetic field
Heat Transfer of Nanofluid in a Channel with Magnetic Field and Porous Obstacle using the Darcy-Brinkman-Forchheimer Model in the LBM Method [Volume 32, Issue 1, 2020-2021, Pages 153-172]
-
Mathematical model
Thermal Performance Analysis of Natural Draft Dry Cooling Towers Based on New Theoretical Method [Volume 32, Issue 1, 2020-2021, Pages 191-210]
-
Microfluidic
Numerical Simulation of Same-sized Cells Focusing and Separation with Surface Acoustic Waves [Volume 32, Issue 1, 2020-2021, Pages 77-92]
-
Micro-hardness
Study on the effects of ball burnishing parameters and initial surface roughness on the core roughness characteristics of Copper cylindrical parts [Volume 32, Issue 2, 2020-2021, Pages 113-132]
-
Micro-Mixer
Numerical Analysis of Magnetic Mixing Phenomenon in an Electroosmotic Flow between Two Parallel Plates [Volume 32, Issue 1, 2020-2021, Pages 174-190]
-
Mixed convection
Numerical analysis of mix convection of sodium alginate non-Newtonian fluid with 〖Al〗_2 O_3nanoparticle in a channel with block [Volume 32, Issue 1, 2020-2021, Pages 93-110]
-
Mixing Efficiency
Numerical Analysis of Magnetic Mixing Phenomenon in an Electroosmotic Flow between Two Parallel Plates [Volume 32, Issue 1, 2020-2021, Pages 174-190]
-
Mixing Vanes
Effect of Vanes Angles on the Flow around Fuel Rods and the Induced Vibrations by Analyzing Solid-Fluid Interaction [Volume 32, Issue 2, 2020-2021, Pages 133-148]
-
Modeling
Numerical and Experimental Investigation on the Parabolic Dish SolarConcentrator [Volume 32, Issue 1, 2020-2021, Pages 17-38]
-
Modeling
Determine the Optimal Algorithm of Priority Panel in CNG Refueling Station to Minimize Energy Cost [Volume 32, Issue 2, 2020-2021, Pages 201-216]
N
-
Nano fluid
Numerical analysis of mix convection of sodium alginate non-Newtonian fluid with 〖Al〗_2 O_3nanoparticle in a channel with block [Volume 32, Issue 1, 2020-2021, Pages 93-110]
-
Nanofluid
Heat Transfer of Nanofluid in a Channel with Magnetic Field and Porous Obstacle using the Darcy-Brinkman-Forchheimer Model in the LBM Method [Volume 32, Issue 1, 2020-2021, Pages 153-172]
-
Nano-tweezers
Stability Analysis of Nano-wire Made Tweezers in Magnetic Flux [Volume 32, Issue 2, 2020-2021, Pages 149-164]
-
Natural draft dry cooling tower
Thermal Performance Analysis of Natural Draft Dry Cooling Towers Based on New Theoretical Method [Volume 32, Issue 1, 2020-2021, Pages 191-210]
-
Natural gas
Determine the Optimal Algorithm of Priority Panel in CNG Refueling Station to Minimize Energy Cost [Volume 32, Issue 2, 2020-2021, Pages 201-216]
-
Natural gas leakage
Presenting a Correlation to Obtain Natural Gas Leakage Rate from a Buried High-Pressure Pipeline in a Porous Media [Volume 32, Issue 1, 2020-2021, Pages 231-254]
-
Navier-Stokes
Numerical Analysis of Magnetic Mixing Phenomenon in an Electroosmotic Flow between Two Parallel Plates [Volume 32, Issue 1, 2020-2021, Pages 174-190]
-
Nondestructive evaluation
Finite Element Modeling of Laser Ultrasonics Process in Thermoelastic Regime [Volume 32, Issue 1, 2020-2021, Pages 133-152]
-
Numerical simulation
Numerical Analysis of Magnetic Mixing Phenomenon in an Electroosmotic Flow between Two Parallel Plates [Volume 32, Issue 1, 2020-2021, Pages 174-190]
-
Numerical simulation
Numerical Simulation of Same-sized Cells Focusing and Separation with Surface Acoustic Waves [Volume 32, Issue 1, 2020-2021, Pages 77-92]
-
Nusselt Number
Simulation of fluid flow in a heat exchanger with elastic intermediate separator at different working conditions [Volume 32, Issue 2, 2020-2021, Pages 77-92]
O
-
One-way Highway
Numerical Investigation of Darrieus Wind Turbine near a One-way Highway [Volume 32, Issue 1, 2020-2021, Pages 1-16]
-
Optimization
Determine the Optimal Algorithm of Priority Panel in CNG Refueling Station to Minimize Energy Cost [Volume 32, Issue 2, 2020-2021, Pages 201-216]
-
Oscillating airfoil
Investigation of Suction Jet Parameters in Flow Control of Dynamic Stall [Volume 32, Issue 2, 2020-2021, Pages 181-200]
P
-
Parabolic Dish Solar Concentrator
Numerical and Experimental Investigation on the Parabolic Dish SolarConcentrator [Volume 32, Issue 1, 2020-2021, Pages 17-38]
-
Phase change materials
Thermo-Economic evaluation of a solar dryer with evacuated heat pipe collector and energy storage [Volume 32, Issue 1, 2020-2021, Pages 39-58]
-
Photovoltaic panel
Optimization of hybrid solar/wind/battery system with different prime movers (Diesel engine, Gas engine, Gas turbine) [Volume 32, Issue 2, 2020-2021, Pages 61-76]
-
Pipeline
Presenting a Correlation to Obtain Natural Gas Leakage Rate from a Buried High-Pressure Pipeline in a Porous Media [Volume 32, Issue 1, 2020-2021, Pages 231-254]
-
Pitch to chord ratio
Parametric study and numerical analysis of the regenerative compressor with symmetric aerodynamic blades, to improve performance [Volume 32, Issue 2, 2020-2021, Pages 1-18]
-
Porous
Frequency Analysis of Cracked Porous Functionally Graded Beams on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 32, Issue 2, 2020-2021, Pages 93-112]
-
Prime movers
Optimization of hybrid solar/wind/battery system with different prime movers (Diesel engine, Gas engine, Gas turbine) [Volume 32, Issue 2, 2020-2021, Pages 61-76]
R
-
Radial turbine
Scaling of a Radial Turbine for Turbocharger of a Lean Combustion Engine [Volume 32, Issue 2, 2020-2021, Pages 165-180]
-
Regenerative flow compressor
Parametric study and numerical analysis of the regenerative compressor with symmetric aerodynamic blades, to improve performance [Volume 32, Issue 2, 2020-2021, Pages 1-18]
-
Reynolds Number
Simulation of fluid flow in a heat exchanger with elastic intermediate separator at different working conditions [Volume 32, Issue 2, 2020-2021, Pages 77-92]
S
-
Sandwich Panel
Experimental and Numerical Investigation on Concrete Specimens with Expanded Metal Sheet under Impact Loading [Volume 32, Issue 1, 2020-2021, Pages 211-230]
-
Scaling
Scaling of a Radial Turbine for Turbocharger of a Lean Combustion Engine [Volume 32, Issue 2, 2020-2021, Pages 165-180]
-
Self-contact concrete
Experimental and Numerical Investigation on Concrete Specimens with Expanded Metal Sheet under Impact Loading [Volume 32, Issue 1, 2020-2021, Pages 211-230]
-
Solar energy
Thermo-Economic evaluation of a solar dryer with evacuated heat pipe collector and energy storage [Volume 32, Issue 1, 2020-2021, Pages 39-58]
-
Spinning
Feed effect on strain and stress in dome forming (spinning) of a tube in an aluminum CNG vessel manufacturing [Volume 32, Issue 2, 2020-2021, Pages 43-60]
-
Standing Surface Acoustic Waves
Numerical Simulation of Same-sized Cells Focusing and Separation with Surface Acoustic Waves [Volume 32, Issue 1, 2020-2021, Pages 77-92]
-
Suction jet
Investigation of Suction Jet Parameters in Flow Control of Dynamic Stall [Volume 32, Issue 2, 2020-2021, Pages 181-200]
-
Surface profile
Study on the effects of ball burnishing parameters and initial surface roughness on the core roughness characteristics of Copper cylindrical parts [Volume 32, Issue 2, 2020-2021, Pages 113-132]
-
Surface Roughness
Study on the effects of ball burnishing parameters and initial surface roughness on the core roughness characteristics of Copper cylindrical parts [Volume 32, Issue 2, 2020-2021, Pages 113-132]
-
Symmetric aero-foil blades
Parametric study and numerical analysis of the regenerative compressor with symmetric aerodynamic blades, to improve performance [Volume 32, Issue 2, 2020-2021, Pages 1-18]
T
-
Taguchi method
Heat Transfer of Nanofluid in a Channel with Magnetic Field and Porous Obstacle using the Darcy-Brinkman-Forchheimer Model in the LBM Method [Volume 32, Issue 1, 2020-2021, Pages 153-172]
-
Thermal Analysis
Numerical and Experimental Investigation on the Parabolic Dish SolarConcentrator [Volume 32, Issue 1, 2020-2021, Pages 17-38]
-
Thermal performance
Thermal Performance Analysis of Natural Draft Dry Cooling Towers Based on New Theoretical Method [Volume 32, Issue 1, 2020-2021, Pages 191-210]
-
Third Order Reddy Theory
Frequency Analysis of Cracked Porous Functionally Graded Beams on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 32, Issue 2, 2020-2021, Pages 93-112]
-
Total annual cost
Optimization of hybrid solar/wind/battery system with different prime movers (Diesel engine, Gas engine, Gas turbine) [Volume 32, Issue 2, 2020-2021, Pages 61-76]
-
Transmission and Supply pipelines
Presenting a Correlation to Obtain Natural Gas Leakage Rate from a Buried High-Pressure Pipeline in a Porous Media [Volume 32, Issue 1, 2020-2021, Pages 231-254]
-
Traveling Surface Acoustic Waves
Numerical Simulation of Same-sized Cells Focusing and Separation with Surface Acoustic Waves [Volume 32, Issue 1, 2020-2021, Pages 77-92]
-
Turbocharger
Scaling of a Radial Turbine for Turbocharger of a Lean Combustion Engine [Volume 32, Issue 2, 2020-2021, Pages 165-180]
-
Turbulent jet
Numerical Prediction of Near-field Noise and Return Acoustics from Sonic Jets in Different Operating Conditions [Volume 32, Issue 2, 2020-2021, Pages 19-42]
-
Turbulent mixing noise
Numerical Prediction of Near-field Noise and Return Acoustics from Sonic Jets in Different Operating Conditions [Volume 32, Issue 2, 2020-2021, Pages 19-42]
U
-
Ultrasound
Finite Element Modeling of Laser Ultrasonics Process in Thermoelastic Regime [Volume 32, Issue 1, 2020-2021, Pages 133-152]
W
-
Wind turbine
Optimization of hybrid solar/wind/battery system with different prime movers (Diesel engine, Gas engine, Gas turbine) [Volume 32, Issue 2, 2020-2021, Pages 61-76]
-
Winkler Pasternak
Frequency Analysis of Cracked Porous Functionally Graded Beams on Elastic Foundation using Reddy Third Order Shear Deformation Theory [Volume 32, Issue 2, 2020-2021, Pages 93-112]
Your query does not match with any item