Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Investigating the Effect of Angle and Length of Vortex Generators with Sinusoidal Structure on Compact Heat Exchangers Performance

Document Type : Original Article

Authors
Ali Sadollah 1
Davood Barati 2
Amir Hossein Dodangeh 3
1 Department of Mechanical Engineering, Faculty of Engineering, University of Science and Culture, Tehran, Iran
2 Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
3 Department of Mechatronics, Islamic Azad University, Karaj Branch, Alborz, Iran
10.22067/jacsm.2024.81445.1171
Abstract
The increasing use of compact heat exchangers, which both have less weight and occupy a smaller space than large exchangers, has made the study of such exchangers more necessary. In this article, the aim is to examine several proposed models of this type of converters with the presence of vortex generators in different geometries, in terms of heat transfer rate and pressure drop. To achieve these goals, vortex generators with sine wave regulation have been designed and investigated under several angles of attack and different lengths to determine the effects of these different geometric parameters on the heat transfer rate from the tubes. and determine the pressure drop along the converter. In the given problem, hot air with a constant temperature of 350 K is flowing inside the tubes and cold air with a temperature of 300 K is flowing in the shell of the heat exchanger. This problem has been discretized in a steady state and in a two-dimensional form in a slow fluid flow (Reynolds numbers between 400 and 1000), using the finite element method, and analyzed in the Ansys Fluent commercial software. Finally, sinusoidal vortex generators with an angle of attack of 20 degrees and a length of 6 mm have the most appropriate amount of heat transfer and pressure drop among the studied conditions.
Keywords
Heat transfer rate
Compact heat exchanger
Sinusoidal vortex generators
London goodness factor
Subjects
[1]    A. Hajimohammadi, and M. Rajabi Zargarabadi, “Numerical Simulation of the Effects of Sinusoidal Pulsed Impinging Jet on Heat Transfer from the Concave Cylindrical Surface”, Journal of Applied and Computational Sciences in Mechanics, vol. 29, no. 1, pp. 17-30, 2018. (in persian) https://doi.org/10.22067/fum-mech.v29i1.59499
[2]    H. Eskandari, S. I. Hashemi Marghmolki, ''Numerical comparison of thermo-hydraulic characteristics of the shell side of shell-tube heat exchangers with trifoil baffles and sector baffles by means of genetic algorithm'', Journal of Applied and Computational Sciences in Mechanics, vol. 35, no. 2, pp. 55-76, (2023) (in persian).
[3]    H. Pakdaman, M. R. Alizadeh, and V. Kalanter, ''Numerical investigation of heat transfer and pressure drop in plate heat exchanger with chevron plates'', Journal of Applied and Computational Sciences in Mechanics, vol. 25, no. 1, pp. 47-60, 2013. (in persian) https://doi.org/10.22067/fum-mech.v25i1.16053
[4]    A. Žkauskas, ''Heat Transfer from Tubes in Crossflow'', Advances in heat transfer, vol. 18, pp. 87-159, 1987. https://doi.org/10.1016/S0065-2717(08)70038-8
[5]    J. S. Leu, Y. H. Wu, and J. Y. Jang, ''Heat transfer and fluid flow analysis in plate-fin and tube heat exchangers with a pair of block shape vortex generators'', International Journal of Heat and Mass Transfer, vol. 47, no. 19, pp. 4327-4338, (2004).
[6]    A. A. Gholami, M. A. Wahid, and H. A. Mohammed, ''Heat transfer enhancement and pressure drop for fin-and-tube compact heat exchangers with wavy rectangular winglet-type vortex generators'', International Communications in Heat and Mass Transfer, vol. 54, pp. 132-140, 2014. https://doi.org/10.1016/j.icheatmasstransfer.2014.02.016
[7]    Y. L. He, P. Chu, W. Q. Tao, Y. W. Zhang, and T. Xie, ''Analysis of heat transfer and pressure drop for fin-and-tube heat exchangers with rectangular winglet-type vortex generators'', Applied Thermal Engineering, vol. 61, no. 2-3, pp.770-783, 2013. https://doi.org/10.1016/j.applthermaleng.2012.02.040
[8]    A. J. Modi, and M. K. Rathod, ''Comparative study of heat transfer enhancement and pressure drop for fin-and-circular tube compact heat exchangers with sinusoidal wavy and elliptical curved rectangular winglet vortex generator'', International Journal of Heat and Mass Transfer, vol. 141, pp. 310-326, 2019. https://doi.org/10.1016/j.ijheatmasstransfer.2019.06.088
[9]    M. Awais, and A. A. Bhuiyan, ''Enhancement of thermal and hydraulic performance of compact finned-tube heat exchanger using vortex generators (VGs): A parametric study'', International Journal of ThermalSciences, vol. 140, pp. 154-166, 2019. https://doi.org/10.1016/j.ijthermalsci.2019.02.041
[10] G. Lu, and X. Zhai, ''Effects of curved vortex generators on the air-side performance of fin-and-tube heat exchangers'', International Journal of Thermal Sciences, vol. 136 ,pp. 509-518, 2019. https://doi.org/10.1016/j.ijthermalsci.2018.11.009
[11] Y. Wang, W. Zhao, P. Wang, J. Jiang, and X. Lou, ''Thermal Performance of Elliptical Fin-and-Tube Heat Exchangers with Vortex Generator under Various Inclination Angles'', Journal of Thermal Science, vol. 30, no. 1, pp. 257-270, 2021. https://doi.org/10.1007/s11630-020-1305-3
[12] D. Sahel, H. Ameur, and K. Alem, ''Enhancement of the hydrothermal characteristics of fin-and-tube heat exchangers by vortex generators'', Journal of Thermophysics and Heat Transfer, vol. 35, no.1, pp. 152-163, 2021.
[13] S. Caliskan, S. Şevik, and Ö. Özdilli, ''Heat transfer enhancement by a sinusoidal wavy plate having punched triangular vortex generators'', International Journal of Thermal Sciences, vol. 181, pp. 107769, 2022. https://doi.org/10.1016/j.ijthermalsci.2022.107769
[14] H. Naik, S. Tiwari, and H. D. Kim, ''Flow and thermal characteristics produced by a curved rectangular winglet vortex generator in a channel'', International Communications in Heat and Mass Transfer, vol. 135, pp. 106103, 2022. https://doi.org/10.1016/j.icheatmasstransfer.2022.106103
[15] J. Wu, P. Liu, M. Yu, Z. Liu, and W. Liu, ''Thermo-hydraulic performance and exergy analysis of a fin-and-tube heat exchanger with sinusoidal wavy winglet type vortex generators'', International Journal of Thermal Sciences, vol. 172, pp. 107274, 2022. https://doi.org/10.1016/j.ijthermalsci.2021.107274
[16] A. Arora, and P. M. V. Subbarao, ''Geometric parametrization of toe-out type vortex generators for energy-efficient capacity augmentation in finned-tube heat exchangers'', Thermal Science and Engineering Progress, vol. 42, pp. 101936, 2023. https://doi.org/10.1016/j.tsep.2023.101936
[17] P. Saini, A. Dhar, and S. Powar, ''Performance enhancement of fin and tube heat exchanger employing curved trapezoidal winglet vortex generator with circular punched holes'', International Journal of Heat and Mass Transfer, vol. 209, pp. 124142, 2023. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124142
[18] H. Sun, H. Fu, H. Ma, T. Sun, Y. Luan, and P. Zunino, ''Heat transfer enhancement mechanism of elliptical cylinder for minichannels with delta winglet longitudinal vortex generators'', International Journal of Thermal Sciences, vol. 198, pp. 108839, 2024. https://doi.org/10.1016/j.ijthermalsci.2023.108839
[19] A. S. Hurry, A. Vafadar, K. Hayward, F. Guzzomi, and K. Rauthan, ''Numerical investigation of the thermo-hydraulic performance of a shark denticle-inspired plate fin heat exchanger'', Applied Thermal Engineering, vol. 239, pp. 122192, 2024. https://doi.org/10.1016/j.applthermaleng.2023.122192
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.