Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Using new friction models to investigate the mechanical properties of liver cancer tissue

Document Type : Original Article

Authors
Moein Taheri
Zahra Sadat Eghdami
Mechanical Engineering, Arak University, Arak, Iran
10.22067/jacsm.2024.87206.1245
Abstract
Today, liver cancer ranks sixth among cancers and ranks fourth among the causes of death. Examining the condition of the body and early recognition of this disease can be effective in its control and treatment. Examining the mechanical properties of the liver tissue and studying its Young's modulus will identify the health status of the tissue and the patient. In this research, Young's modulus has been theoretically calculated using slab friction models, reset integration, and Bleiman and Sorin models. Also, using atomic force microscope, this modulus has been extracted experimentally. Comparison of theoretical and experimental modules obtained will have similar results. According to the examination of texture and relationships at the nano level, the second model of Billman and Sorin is more accurate due to the smaller range of changes and the more complex equation. Therefore, it is suggested to use the second model of Billman and Sorin in future researches.
Keywords
Liver cancer tissue
Dahl friction model
reset integration
Bleiman and Sorin friction models
atomic force microscope
Subjects
 [1] J. Zemła, J. Danilkiewicz, B. Orzechowska, J. Pabijan, S. Seweryn, M. Lekka, “Atomic force microscopy as a tool for assessing the cellular elasticity and adhesiveness to identify cancer cells and tissues,” Seminars in cell & Developmental Biology, vol. 73, pp. 115-124, January (2018)
[2] F. Pillet, L. Chopinet, C. Formosa, É. Dague, “Atomic force microscopy and pharmacology: from microbiology to cancerology,” Biochimica et Biophysica Acta (BBA) - General Subjects, vol. 1840, no. 3, pp. 1028-1050, (2014).
[3] Y. Kim, J. W. Hong, J. Kim, J. H. Shin, “Comparative study on the differential mechanical properties of human liver cancer and normal cells,” Animal Cells and Systems, vol. 17, no. 3, pp. 170-178, (2013).
[4] M. Tian, Y. Li, W. Liu, L. Jin, X. Jiang, X. Wang, Y.Shi, Z. Ding, Y. Peng, J. Zhou, J. Fan, Y. Cao, W. Wang, “The nanomechanical signature of liver cancer tissues and its molecular origin,” Nanoscale, vol. 7, no. 30, pp. 12998-13010, (2015).
[5] M. Taheri, A. Jabbari, Z. Eghdami, H. Faraji, T. Mollaei, “Experimental and theoretical investigation of Young's modulus of liver cancer tissue using rectangular, V-shaped and dagger cantilevers of an atomic force microscope,” Journal of Solid and Fluid Mechanics, vol. 13, no. 5, pp. 121-135, (2023).
[6] L. Huwart ,F. Peeters , R. Sinkus, L. Annet, N. Salameh, L.C. Beek, Y. Horsmans, B.E Van Beers, “Liver fibrosis: non-invasive assessment with MR elastography,” NMR in Biomedicine, vol. 19, vo. 2, pp. 173-179, (2006).
[7] M. Bernal, F. Chamming, M. Couade, J. Bercoff, M. Tanter, J. Gennisson, “In vivo quantification of the nonlinear shear modulus in breast lesions: Feasibility study,” IEEE Trans Ultrason Ferroelectr Freq Control, vol. 63, no. 1, pp. 101-109, (2016).
[8] B. Zarei, S. Bathaee, M. Taheri, M. Momeni, “Second phase of nanomanipulation of particles by atomic force microscopy using Coulomb, HK, and LuGre Friction Models,” Modares Mechanical Engineering, vol. 19, no. 1, pp. 181-190, (2019).
[9] Y. Chen, L. Jiang, L. Qian, “AFM probe for measuring∼ 10− 5 ultra-low friction coefficient: Design and application,” Friction, vol. 12, no. 1, pp. 64-73, (2024).
[10] B. S. Kumar, “Recent advances and biophysical applications of atomic force microscopy in cancer research: An overview,” ChemRxiv, (2024)
[11] M. Taheri, “Application of atomic force microscopy in critical force and critical time extraction of 2D manipulation for gastric cancer tissue with different friction models,” NANOSCALE, vol. 9, no. 1, pp. 136-145, (2022).
[12] X. Tan, G. Chen, D. Sun, Y. Chen, “Dynamic Analysis of Planar Mechanical Systems With Clearance Joint Based on LuGre Friction Model,” Journal of. Computattional. Nonlinear Dynamics, vol. 13, no. 6, pp. , (2018)
[13] M. Mirzaluo, F. Fereiduni, M. Taheri, M. Modabberifar, “Experimental extraction of Young’s modulus of MCF-7 tissue using atomic force microscopy and the spherical contact models,” European Biophysics Journal, vol. 52, no. 1, pp. 81-90, (2023).
[14] F. Yang, W. Chen, Z. Chen, “Photoacoustic micro-viscoelastography for mapping mechanocellular properties,” Journal of Biophotonics, vol. 17, no. 1, (2024).
[15] M. Taheri, “Investigation of new friction models in two-dimensional manipulation of gastric cancer tissue,”       Journal of Applied and Computational Sciences in Mechanics, vol. 35, no. 2, pp. 1-16, (2023).
[16] S. Leporatti, D. Vergara, A. Zacheo, V. Vergaro, G. Maruccio, R. Cingolani, R. Rinaldi, “Cytomechanical and topological investigation of MCF-7 cells by scanning force microscopy,” Nanotechnology, vol. 20, no. 5, (2009).
[17] M. Taheri, H. Faraji, “Extraction of force and critical time of three-dimensional manipulation of colon cancer tissue with different models of Persson friction,” Journal of Solid and Fluid Mechanics, vol. 12, no. 6, pp. 113-123, (2023).
[18] M. Zakeri, J. Faraji, “Dynamic modeling of nano/microparticles displacement in multi-point contact based on the Rumpf model,” Modares Mechanical Engineering, vol. 16, no. 8, pp. 120-130, (2016).
[19] M. Korayem, M. Taheri, H. Khaksar, S.H. Bathaee, “Using Micro/Nano Scale Contact Models in 3D Manipulation of Deformation of Au Particles Under Angular Effect,” Iranian Journal of Manufacturing Engineering, vol. 7, no. 5, pp. 33-43, (2020).
[20] P. R. Dahl, “A solid friction model,” The Aerospace Corporation, vol. 18, no. 1, pp. 1-24, (1968).
[21] P. Dahl, “Solid friction damping of spacecraft oscillations”, InGuidance and Control Conference, pp. 1104, (1975).
[22] P. Dahl, R. Wilder, "Math model of hysteresis in piezo-electric actuators for precision pointing systems." Guidance and control, pp. 61-88, (1985)
[23] P. Dahl, “Solid friction damping of mechanical vibrations,” AIAA Journal, vol. 14, pp. 1675–82, (1976).
[24] D. A. Haessig, B. Friedland, “On the modeling and simulation of friction,” ASME Journal of Dynamic Systems Measurement, and Control, vol. 113, no. 3, pp. 354-362, (1991).
[25] P. A. Bliman M. Sorine, “Friction modeling by hysteresis operators application to dahl, stiction and stribeck effects,” Proc. of the Conference Models of Hysteresis, pp. 10-19, (1991).
[26] P. A. Bliman M. Sorine, “A system-theoretic approach of systems with hysteresis Application to friction modeling and compensation,” Proceeding of the second European Control Conference, pp. 1844–1849, (1993).
[27] P. A. Bliman M. Sorine, “Easy-to-use realistic dry friction models for automatic control,” Proceedings of the Third European Control Conference, pp. 3788–3794, (1995).
 [28] Y. Sun, H. Li, Q. Chen, Q. Luo, G. Song, “The distribution of liver cancer stem cells correlates with the mechanical heterogeneity of liver cancer tissue”, Histochemistry and Cell Biology, vol. 156, no. 1, pp. 47–58, (2021).
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.