A
-
Absorption refrigeration
Evaluation of an integrated solar-geothermal energy system to provide power, heat and cooling [Volume 34, Issue 4, 2022, Pages 19-34]
-
Active controller
Investigation of the impact of blowing jet on the dynamic stall of NACA0012 [Volume 34, Issue 1, 2022, Pages 1-20]
-
Added Mass
Calculating the Added Mass Matrix of an Airship Using Boundary Element Method [Volume 34, Issue 2, 2022, Pages 15-28]
-
Aerodynamics performance
Investigation of the impact of blowing jet on the dynamic stall of NACA0012 [Volume 34, Issue 1, 2022, Pages 1-20]
-
Airship
Calculating the Added Mass Matrix of an Airship Using Boundary Element Method [Volume 34, Issue 2, 2022, Pages 15-28]
-
Aluminum foam
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
-
Angle-ply Laminate
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2022, Pages 1-18]
B
-
Bending
The effect of material degradation on the bending of laminated plates [Volume 34, Issue 2, 2022, Pages 1-14]
-
Biomass
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Boundary Element Method
Calculating the Added Mass Matrix of an Airship Using Boundary Element Method [Volume 34, Issue 2, 2022, Pages 15-28]
-
Bubbling Fluidized Bed
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
C
-
Chirp signal
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
-
Conjugate heat transfer
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
-
Continuous blowing jet
Investigation of the impact of blowing jet on the dynamic stall of NACA0012 [Volume 34, Issue 1, 2022, Pages 1-20]
D
-
Defect
Investigation of the Effect of Geometric Defects and Temperature Changes on the Fracture Behavior of Boron Carbide Monocrystalline Structure by Molecular Dynamics [Volume 34, Issue 1, 2022, Pages 37-48]
-
DesignBuilder
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2022, Pages 35-52]
-
Dynamic stall
Investigation of the impact of blowing jet on the dynamic stall of NACA0012 [Volume 34, Issue 1, 2022, Pages 1-20]
E
-
Electromagnetic actuator
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
-
Energy saving
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2022, Pages 35-52]
-
Entropy generation
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
-
Exergy
Evaluation of an integrated solar-geothermal energy system to provide power, heat and cooling [Volume 34, Issue 4, 2022, Pages 19-34]
F
-
FEM
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
-
Floquet Theory
Dynamic Stability Analysis of Rectangular Mindlin Plate in Contact with Fluid under Passage of Oscillating Rigid Bodies [Volume 34, Issue 4, 2022, Pages 65-88]
-
Flow Control
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Flow distribution
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
-
Flower pattern
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Flow-induced vibration
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Fluid-solid interaction
Numerical study of the effect of elastic wall vibration mode on internal flow parameters [Volume 34, Issue 3, 2022, Pages 97-112]
-
Forced convection
Numerical study of the effect of elastic wall vibration mode on internal flow parameters [Volume 34, Issue 3, 2022, Pages 97-112]
-
Fourier Method
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
-
Fuel Rod
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2022, Pages 89-104]
G
-
Galerkin method
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
-
Galloping
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Geometry
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
-
Geothermal
Evaluation of an integrated solar-geothermal energy system to provide power, heat and cooling [Volume 34, Issue 4, 2022, Pages 19-34]
H
-
Half- car model
Robust-Adaptive Sliding Mode Controller Design with Fault tolerance for Active Suspension of Half-car model [Volume 34, Issue 3, 2022, Pages 79-96]
-
Hydrodynamic
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Hygrothermal environment
The effect of material degradation on the bending of laminated plates [Volume 34, Issue 2, 2022, Pages 1-14]
I
-
Inclination angle of chamber
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
-
Incompressible flow
Numerical study of the effect of elastic wall vibration mode on internal flow parameters [Volume 34, Issue 3, 2022, Pages 97-112]
L
-
Laminated composite plates
The effect of material degradation on the bending of laminated plates [Volume 34, Issue 2, 2022, Pages 1-14]
-
Lattice Composite Structure
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
M
-
Manifold
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
-
Material degradation
The effect of material degradation on the bending of laminated plates [Volume 34, Issue 2, 2022, Pages 1-14]
-
Mechanical properties
Investigation of the Effect of Geometric Defects and Temperature Changes on the Fracture Behavior of Boron Carbide Monocrystalline Structure by Molecular Dynamics [Volume 34, Issue 1, 2022, Pages 37-48]
-
Metal/Composite Hybrid (FML)
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2022, Pages 1-18]
-
Mindlin Plate
Dynamic Stability Analysis of Rectangular Mindlin Plate in Contact with Fluid under Passage of Oscillating Rigid Bodies [Volume 34, Issue 4, 2022, Pages 65-88]
-
Mixing Bed Material and Biomass
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Molecular Dynamics
Investigation of the Effect of Geometric Defects and Temperature Changes on the Fracture Behavior of Boron Carbide Monocrystalline Structure by Molecular Dynamics [Volume 34, Issue 1, 2022, Pages 37-48]
N
-
Nanofluid
Effect of microtube addition on thermal and hydrodynamic behavior of microchannel heatsink for nanofluid Flow [Volume 34, Issue 1, 2022, Pages 21-36]
-
Nanofluid
Numerical study of forced convection in a microchannel in the presence of nanofluid using the slip condition [Volume 34, Issue 4, 2022, Pages 53-64]
-
Natural Frequency
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
-
Natural Frequency and Mode Shape
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2022, Pages 89-104]
-
Navier-Stokes Equations
Numerical study of the effect of elastic wall vibration mode on internal flow parameters [Volume 34, Issue 3, 2022, Pages 97-112]
-
Nested profiles
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
-
Neural Network
Flow prediction in two-dimensional asymmetric diffuser by neural network and comparison with three turbulence models and experimental data [Volume 34, Issue 2, 2022, Pages 45-60]
-
Non-uniform blank-holder force
Automatic determination of non-uniform blank-holder force in sheet metal forming [Volume 34, Issue 1, 2022, Pages 81-96]
-
Numerical and Experimental Modal Analysis
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2022, Pages 89-104]
O
-
Oscillating Rigid Body
Dynamic Stability Analysis of Rectangular Mindlin Plate in Contact with Fluid under Passage of Oscillating Rigid Bodies [Volume 34, Issue 4, 2022, Pages 65-88]
P
-
PCM
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2022, Pages 35-52]
-
PEM fuel cell
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
-
Phase change materials
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2022, Pages 35-52]
-
Power-law liquids
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
-
Power production
Evaluation of an integrated solar-geothermal energy system to provide power, heat and cooling [Volume 34, Issue 4, 2022, Pages 19-34]
-
Prefabricated building
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2022, Pages 35-52]
R
-
Reshaping of cold roll forming
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Restitution Coefficient
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Robust-adaptive Sliding mode control
Robust-Adaptive Sliding Mode Controller Design with Fault tolerance for Active Suspension of Half-car model [Volume 34, Issue 3, 2022, Pages 79-96]
S
-
Sandwich Panel
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2022, Pages 1-18]
-
Slip Coefficient
Numerical study of forced convection in a microchannel in the presence of nanofluid using the slip condition [Volume 34, Issue 4, 2022, Pages 53-64]
-
Solar energy
Thermofluid Numerical simulation of the flat solar heating transpired collector for drying purposes [Volume 34, Issue 1, 2022, Pages 61-80]
-
Solar energy
Evaluation of an integrated solar-geothermal energy system to provide power, heat and cooling [Volume 34, Issue 4, 2022, Pages 19-34]
-
Spacer Grid
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2022, Pages 89-104]
-
Specularity Coefficient
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Square geometry
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Stability analysis
Dynamic Stability Analysis of Rectangular Mindlin Plate in Contact with Fluid under Passage of Oscillating Rigid Bodies [Volume 34, Issue 4, 2022, Pages 65-88]
-
STM32 board
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
-
System Identification
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
T
-
Thermal comfort
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2022, Pages 35-52]
-
Thermal Development
Numerical study of forced convection in a microchannel in the presence of nanofluid using the slip condition [Volume 34, Issue 4, 2022, Pages 53-64]
-
Thermal efficiency
Thermofluid Numerical simulation of the flat solar heating transpired collector for drying purposes [Volume 34, Issue 1, 2022, Pages 61-80]
-
Thermofluid numerical
Thermofluid Numerical simulation of the flat solar heating transpired collector for drying purposes [Volume 34, Issue 1, 2022, Pages 61-80]
-
Thin-walled profiles
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
-
Third-Order Shear Deformation Theory
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2022, Pages 1-18]
-
Two-phase Flow
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
U
-
Uncertainty
Robust-Adaptive Sliding Mode Controller Design with Fault tolerance for Active Suspension of Half-car model [Volume 34, Issue 3, 2022, Pages 79-96]
-
Unglazed transpired flat plate solar collector
Thermofluid Numerical simulation of the flat solar heating transpired collector for drying purposes [Volume 34, Issue 1, 2022, Pages 61-80]
-
Uniform and non-uniform magnetic field
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
-
Uniform distribution of force. Energy consumption
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Uniform heat absorption/production
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
-
Unsteady flow
Investigation of the impact of blowing jet on the dynamic stall of NACA0012 [Volume 34, Issue 1, 2022, Pages 1-20]
V
-
Volume Fraction Laminate
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2022, Pages 1-18]
-
Vortex Shedding
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
W
-
Wall Boundary Condition for solid Phase
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Water removal
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
Your query does not match with any item