Prediction of High Cycle Fatigue Life with Variable Loading Amplitude using Thermography Method

Document Type : Original Article

Authors

• Mohammad Keshtgar ¹
• Mahmoud Shariati ²
• khalil farhang dost ²

¹ Mechanical Engineering Department, Ferdowsi university of Mashhad

² Department of Mechanical Engineering, Ferdowsi University, Mashad, Iran.

10.22067/jacsm.2023.83002.1189

Abstract

In this article, the life of metals under fatigue loading with variable amplitude has been investigated. For this purpose, the continuum damage mechanics method is used to model the damage parameter, in which the amount of dissipated energy in each cycle per volume is known as the damage index. The damage model introduced in this article has the ability to be used in problems with variable amplitude, therefore, in this study, a specimen of Q235 steel was simulated in Abaqus software and from two subroutines UMAT and UMATHT to simultaneously extract dissipated energy in Each cycle and its corresponding temperature were used. In order to investigate the fatigue life under variable amplitude loading, Two blocks with different amplitudes have been considered. Different types have been considered for these two blocks, and their results show that the introduced damage model has a high sensitivity to the loading history and sequence; Also, there is a good agreement between the results of this research and the experimental results.

Keywords

• High cycle fatigue
• Continuum damage mechanic
• Damage index
• Dissipated energy in each cycle

Main Subjects

• Fatigue and fracture

---

References

[1] M.A. Farsi, A.R. Sehat, " Experimental and Numerical Study on Aluminum Damage Using a Nonlinear Model of Continuum Damage Mechanics," Journal of Applied and Computational Sciences in Mechanics, vol. 27, no. 2, pp. 41-54, (2016). (In Persian). http://doi10.22067/fum_mech.v27i2.41919

[2] J. Chaboche, P. A. Lesne, "A non‐linear continuous fatigue damage model", Fatigue & Fracture of Engineering Materials & Structures, vol. 11, no. 1, pp. 1-17, (1988). https://doi.org/10.1111/j.1460-2695.1988.tb01216.x

[3] Y.-C. Xiao, S. Li, and Z. Gao, "A continuum damage mechanics model for high cycle fatigue" International Journal of Fatigue, vol. 20, no. 7, pp. 503-508, (1998). https://doi.org/10.1016/S0142-1123(98)00005-X

[4] J. Lemaitre, J.L. Chaboche, Mechanics of Solid Materials. Cambridge university press, (1994).

[5] J. Lemaitre, "A continuous damage mechanics model for ductile fracture", Journal of Engineering Material and Technology, vol. 107, no. 1, pp.83-89 (1985).https://doi.org/10.1115/1.3225775

[6] S. Chandrakanth, P. Pandey, "An isotropic damage model for ductile material", Engineering Fracture Mechanics, vol. 50, no. 4, pp. 457-465, (1995). https://doi.org/10.1016/0013-7944(94)00214-3

[7] N. Bonora, "A nonlinear CDM model for ductile failure", Engineering Fracture Mechanics, vol. 58, no. 1-2, pp. 11-28, (1997). https://doi.org/10.1016/S0013-7944(97)00074-X

[8] N. Bonora, "On the effect of triaxial state of stress on ductility using nonlinear CDM model", International Journal of Fracture, vol. 88, pp. 359-371, (1997).

[9] A. Benzerga, J. Besson, and A. Pineau, "Anisotropic ductile fracture: Part II: theory", Acta Materialia, vol. 52, no. 15, pp. 4639-4650, (2004). https://doi.org/10.1016/j.actamat.2004.06.020

[10] M. Mashayekhi and S. Ziaei-Rad, "Identification and validation of a ductile damage model for A533 steel", Journal of Materials Processing Technology, vol. 177, no. 1-3, pp. 291-295, (2006).

https://doi.org/10.1016/j.jmatprotec.2006.03.180

[11] A. Pirondi, N. Bonora, D. Steglich, W. Brocks, and D. Hellmann, "Simulation of failure under cyclic plastic loading by damage models", International Journal of Plasticity, vol. 22, no. 11, pp. 2146-2170, (2006).

https://doi.org/10.1016/j.jmatprotec.2006.03.180

[12] A. Palmgren, "Durability of ball bearings," ZVDI, vol. 68, no. 14, pp. 339-341, (1924).

[13] M. A. Miner, "Cumulative damage in fatigue", Journal of Applied Mechanics, vol. 12, no.3, pp. A159-A164 (1945). https://doi.org/10.1115/1.4009458

[14] K. Hectors, W. De Waele, "Cumulative damage and life prediction models for high-cycle fatigue of metals: a review", Metals, vol. 11, no. 2, p. 204, (2021). https://doi.org/10.3390/met11020204

[15] J. Jang, M. M. Khonsari, "On the prediction of fatigue life subjected to variable loading sequence", Fatigue & Fracture of Engineering Materials & Structures, vol. 44, no. 11, pp. 2962-2974, (2021).

https://doi.org/10.1111/ffe.13526

[16] G. Cheng, A. Plumtree, "A fatigue damage accumulation model based on continuum damage mechanics and ductility exhaustion," International Journal of Fatigue, vol. 20, no. 7, pp. 495-501, (1998).

https://doi.org/10.1016/S0142-1123(98)00018-8

[17] A. Fatemi, L. Yang, "Cumulative fatigue damage and life prediction theories: a survey of the state of the art for homogeneous materials", International Journal of Fatigue, vol. 20, no. 1, pp. 9-34, (1998).

https://doi.org/10.1016/S0142-1123(98)00018-8

[18] H. Mao, S. Mahadevan, "Fatigue damage modelling of composite materials", Composite Structures, vol. 58, no. 4, pp. 405-410, (2002). https://doi.org/10.1016/S0263-8223(02)00126-5

[19] D. Kreiser, S. X. Jia, J. J. Han, and M. Dhanasekar, "A nonlinear damage accumulation model for shakedown failure", International Journal of Fatigue, vol. 29, no. 8, pp. 1523-1530, (2007).https://doi.org/10.1016/j.ijfatigue.2006.10.023

[20] M. Amiri, M. Khonsari, "Life prediction of metals undergoing fatigue load based on temperature evolution", Materials Science and Engineering: A, vol. 527, no. 6, pp. 1555-1559, (2010).

https://doi.org/10.1016/j.msea.2009.10.025

[21] M. Naderi, M. Amiri, and M. Khonsari, "On the thermodynamic entropy of fatigue fracture", Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 466, no. 2114, pp. 423-438, (2010).

https://doi.org/10.1098/rspa.2009.0348

[22] Z. Lv, H.-Z. Huang, S.-P. Zhu, H. Gao, and F. Zuo, "A modified nonlinear fatigue damage accumulation model", International Journal of Damage Mechanics, vol. 24, no. 2, pp. 168-181, (2015).

https://doi.org/10.1177/1056789514524075

[23] A. Aeran, S. C. Siriwardane, O. Mikkelsen, and I. Langen, "A new nonlinear fatigue damage model based only on SN curve parameters", International Journal of Fatigue, vol. 103, pp. 327-341, (2017).

https://doi.org/10.1016/j.ijfatigue.2017.06.017

[24] O. Plekhov, N. Saintier, T. Palin-Luc, S. Uvarov, and O. Naimark, "Theoretical analysis, infrared and structural investigations of energy dissipation in metals under cyclic loading", Materials Science and Engineering: A, vol. 462, no. 1-2, pp. 367-369, (2007). https://doi.org/10.1016/j.msea.2006.02.462

[25]  R. De Finis, D. Palumbo, M. Da Silva, and U. Galietti, "Is the temperature plateau of a self‐heating test a robust parameter to investigate the fatigue limit of steels with thermography?," Fatigue & Fracture of Engineering Materials & Structures, vol. 41, no. 4, pp. 917-934, (2018). https://doi.org/10.1111/ffe.12738

[26]  S. Chhith, W. De Waele, P. De Baets, and T. Van Hecke, "On-line detection of fretting fatigue crack initiation by lock-in thermography", Tribology International, vol. 108, pp. 150-155, (2017).

https://doi.org/10.1016/j.triboint.2016.10.019

[27]  G. Meneghetti and M. Ricotta, "The use of the specific heat loss to analyse the low-and high-cycle fatigue behaviour of plain and notched specimens made of a stainless steel", Engineering Fracture Mechanics, vol. 81, pp. 2-16, (2012). https://doi.org/10.1016/j.engfracmech.2011.06.010

[28] V. Crupi, G. Chiofalo and E. Guglielmino, "Using infrared thermography in low-cycle fatigue studies of welded joints," Welding Journal, vol. 89, no. 9, pp. 195-200, (2010).

[29] J. Fan, Y. Zhao, "Quantitative thermography for fatigue damage assessment and life prediction of welded components", Mechanics of Materials, vol. 164, p. 104120, (2022).

[30] E. Feng, X. Wang, C. Jiang and V. Crupi, "Quantitative thermographic method for fatigue life prediction under variable amplitude loading," Fatigue & Fracture of Engineering Materials & Structures, vol. 45, no. 4, pp. 1199-1212, (2022). https://doi.org/10.1111/ffe.13658

[31] J. Fan, X. Guo, and C. Wu, "A new application of the infrared thermography for fatigue evaluation and damage assessment", International Journal of Fatigue, vol. 44, pp. 1-7, (2012).

https://doi.org/10.1016/j.ijfatigue.2012.06.003