Numerical study of the effect of elastic wall vibration mode on internal flow parameters

Document Type : Original Article

Authors

• HOJJAT DANANDEH OSKUEI ¹
• Seyed Esmail razavi ¹
• Seyed Faramarz ranjbar ¹
• Zhaleh Azhdarzadeh ²

¹ Mechanical Engineering, University of Tabriz, Tabriz, Iran.

² Mechanical Engineering, Osku Branch, Islamic azad university, Osku, Iran.

10.22067/jacsm.2022.74523.1082

Abstract

In this study, the effect of replacing the elastic wall in a two-dimensional channel for forced convection flow around a circular cylinder surrounded by an incompressible flow has been studied numerically. As the current passes around the hot cylinder and the elastic wall oscillates, the rate of heat transfer changes at any time, which is a function of the vibration conditions of the elastic oscillator. Amplitude, frequency and vibration mode are the main parameters affecting the current passing through the channel. The2refore, in this study, the effect of oscillator vibration in the first, second and third modes has been investigated and in each mode, three different amplitudes and in each amplitude three different frequencies have been investigated and the calculations for two Reynolds numbers 100 and 200 have been solved. Rigid channels are compared. The results show that in the first mode, unlike the second and third modes, the elastic wall oscillation has a great effect on the average Nusselt number, average output temperature and cylinder drag coefficient. in all modes, with increasing amplitude and frequency, the average Nusselt number, the average output temperature and the drag coefficient of the cylinder increase.

Keywords

• Fluid-Solid interaction
• Navier-Stokes equations
• Forced convection
• Incompressible flow

Main Subjects

• Heat transfer

---

References

1. Shankar V., "Stability of fluid flow through deformable tubes and channels", An overview, Sadhana, Vol.40, No.3, Pp.925-943, (2015).
2. Aydın,O. and Avcı, M.," Analysis of laminar heat transfer in micro-Poiseuille flow", International Journal of Thermal Sciences, Vol.46, Vol. 1, Pp.30-47, (2017).
3. Khan,W., Culham, J. and Yovanovich M.," Fluid flow and heat transfer from a cylinder between parallel planes", Thermophysics and Heat Transfer, Vol. 18, No.3, Pp.395-403, ( 2004;).
4. HAIDER,MJ., Danish,SN., Khan,W., Mehdi,SU.and Abbasi,BA.," Heat transfer and fluid flow over circular cyclinders in cross flow", NUST Journal of Engineering Sciences, Vol.3, No. 1, Pp.67-77, ( 2004;).
5. Tiwari,S., Chakraborty,D., Biswas,G. and Panigrahi,P.," Numerical prediction of flow and heat transfer in a channel in the presence of a built-in circular tube with and without an integral wake splitter", International Journal of Heat and Mass Transfer, Vol.48, No. 2, Pp.439-53, ( 2005).
6. Chen,G., Liang, X-F., Li, X-B., Zhou, D. and Lien, F-s.," Numerical investigation of vortex induced vibration effects on the heat transfer for various aspect ratios ellipse cylinder", International Journal of Thermal Sciences, Vol.170, Pp.107-138, (2021).
7. Kumar,V., Garg, H., Sharma, G. and Bhardwaj, R.," Harnessing flow-induced vibration of a D-section cylinder for convective heat transfer augmentation in laminar channel flow", Physics of Fluids, Vol.32, No. 8, Pp.083-103, (2020).
8. Fu, W-S. and Tong, B-H., " Numerical investigation of heat transfer from a heated oscillating cylinder in a cross flow", International Journal of Heat and Mass Transfer, Vol.45, No. 14, Pp.33-43, (2002).
9. Cheraghi, M., Raisee, M.and Moghaddami, M.," Effect of cylinder proximity to the wall on channel flow heat transfer enhancement", Comptes Rendus Mécanique, Vol.342, No. 2, Pp63-72, (2014).
10. Şahin, Ç. and Atalık, K., " Effects of polymer/surfactant additives on forced convective heat transfer in vortex shedding flow past a circular cylinder", International Journal of Thermal Sciences, Vol. 145, Pp.106-131, (2019).
11. Ghalambaz, M., Jamesahar, E., Ismael, MA. and Chamkha, AJ., "Fluid-structure interaction study of natural convection heat transfer over a flexible oscillating fin in a square cavity", International Journal of Thermal Sciences, Vol.111, Pp256-273, (2017).
12. Ali, S., Habchi, C., Menanteau, S., Lemenand, T. and Harion, J-L., " Heat transfer and mixing enhancement by free elastic flaps oscillation", International Journal of Heat and Mass Transfer, Vol.85, Pp.250-264, (2015).
13. Selimefendigil, F. and Öztop, HF., " Mixed convection in a partially heated triangular cavity filled with nanofluid having a partially flexible wall and internal heat generation", Journal of the Taiwan Institute of Chemical Engineers, Vol.70, Pp.168-78, (2017).
14. Selimefendigil, F. and Öztop, HF., " Forced convection in a branching channel with partly elastic walls and inner L-shaped conductive obstacle under the influence of magnetic field", International Journal of Heat and Mass Transfer, Vol.144, Pp.118-138, (2019).
15. Alsabery, A., Sheremet, M., Ghalambaz, M., Chamkha, A. and Hashim, I., " Fluid-structure interaction in natural convection heat transfer in an oblique cavity with a flexible oscillating fin and partial heating", Applied Thermal Engineering, Vol.145, Pp.80-97, (2018).
16. Sabbar, WA., Ismael, MA. and Almudhaffar, M., " Fluid-structure interaction of mixed convection in a cavity-channel assembly of flexible wall", International Journal of Mechanical Sciences, Vol.149, Pp.73-83, (2018).
17. Zadeh, SMH., Mehryan, S., Izadpanahi, E. and Ghalambaz, M.," Impacts of the flexibility of a thin heater plate on the natural convection heat transfer", International Journal of Thermal Sciences, Vol.145, Pp.106-111, (2019).
18. Ismael MA., " Forced convection in partially compliant channel with two alternated baffles", International Journal of Heat and Mass Transfer, Vol.142, Pp.118-145, (2019).
19. Razavi, S. E, Danandeh Oskuei, H., “Investigating the Fluid-Solid Interaction in Incompressible Flow and The Effect of Oscillation Amplitude on Heat Transfer”, Amirkabir Journal of Mechanical Engineering, Vol. 53, No.9, Pp.1-24, (2021). (In Persian)
20. White, FM. and Majdalani, J., " Viscous fluid flow", McGraw-Hill New York, (2006).
21. Bergman, TL., Lavine, AS., Incropera, FP. and DeWitt, DP., " Introduction to heat transfer, John Wiley & Sons (2011).