A
-
Ahmadi Nadooshan, Afshin
Effect of microtube addition on thermal and hydrodynamic behavior of microchannel heatsink for nanofluid Flow [Volume 34, Issue 1, 2022, Pages 21-36]
-
Ahmadi Nadooshan, Afshin
Numerical study of forced convection in a microchannel in the presence of nanofluid using the slip condition [Volume 34, Issue 4, 2023, Pages 53-64]
-
Alavi Tabatabaei, Sayed Mohammadreza
Calculating the Added Mass Matrix of an Airship Using Boundary Element Method [Volume 34, Issue 2, 2022, Pages 15-28]
-
Albooyeh, Alireza
Investigation of the Effect of Geometric Defects and Temperature Changes on the Fracture Behavior of Boron Carbide Monocrystalline Structure by Molecular Dynamics [Volume 34, Issue 1, 2022, Pages 37-48]
-
Albooyeh, Alireza
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2023, Pages 1-18]
-
Alizadeh, Ebrahim
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
-
Amiri, ALI
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2023, Pages 35-52]
-
Amirian, Reza
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2023, Pages 89-104]
-
Arezoo, Behrooz
Automatic determination of non-uniform blank-holder force in sheet metal forming [Volume 34, Issue 1, 2022, Pages 81-96]
-
Arzandeh, Hosein
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Azamirad, Ghasem
Automatic determination of non-uniform blank-holder force in sheet metal forming [Volume 34, Issue 1, 2022, Pages 81-96]
-
Azhdarzadeh, Zhaleh
Numerical study of the effect of elastic wall vibration mode on internal flow parameters [Volume 34, Issue 3, 2022, Pages 97-112]
B
-
Bahrami, Dariush
Numerical study of forced convection in a microchannel in the presence of nanofluid using the slip condition [Volume 34, Issue 4, 2023, Pages 53-64]
-
Barzan, Mohammad Reza
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Bayareh, Morteza
Effect of microtube addition on thermal and hydrodynamic behavior of microchannel heatsink for nanofluid Flow [Volume 34, Issue 1, 2022, Pages 21-36]
-
Bayareh, Morteza
Numerical study of forced convection in a microchannel in the presence of nanofluid using the slip condition [Volume 34, Issue 4, 2023, Pages 53-64]
-
Boroomandpour, Ahmad Reza
Flow prediction in two-dimensional asymmetric diffuser by neural network and comparison with three turbulence models and experimental data [Volume 34, Issue 2, 2022, Pages 45-60]
D
-
Dadrasi, Ali
Investigation of the Effect of Geometric Defects and Temperature Changes on the Fracture Behavior of Boron Carbide Monocrystalline Structure by Molecular Dynamics [Volume 34, Issue 1, 2022, Pages 37-48]
-
DANANDEH OSKUEI, HOJJAT
Numerical study of the effect of elastic wall vibration mode on internal flow parameters [Volume 34, Issue 3, 2022, Pages 97-112]
-
Davodi Navokh, Seyyed Alireza
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
G
-
Ghasemi, Ali
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
-
Ghomeshi Bozorg, Mehran
Dynamic Stability Analysis of Rectangular Mindlin Plate in Contact with Fluid under Passage of Oscillating Rigid Bodies [Volume 34, Issue 4, 2023, Pages 65-88]
H
-
Hashemian, Amir Hossein
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
-
Heravi, Mohammad
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2023, Pages 1-18]
I
-
Iranmanesh, Masoud
Thermofluid Numerical simulation of the flat solar heating transpired collector for drying purposes [Volume 34, Issue 1, 2022, Pages 61-80]
J
-
Jafarian, Ali
Calculating the Added Mass Matrix of an Airship Using Boundary Element Method [Volume 34, Issue 2, 2022, Pages 15-28]
-
Jahanbakhshi, Akram
Effect of microtube addition on thermal and hydrodynamic behavior of microchannel heatsink for nanofluid Flow [Volume 34, Issue 1, 2022, Pages 21-36]
K
-
Kardgar, Amin
Evaluation of an integrated solar-geothermal energy system to provide power, heat and cooling [Volume 34, Issue 4, 2023, Pages 19-34]
-
Karimi Ahmadi, Reza
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Keshavarzpour, Hemad
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
-
Khatibi, Mohammad Mahdi
Free vibration analysis of sandwich panel plate with FML face sheet and flexible core using third-order shear deformation theory [Volume 34, Issue 4, 2023, Pages 1-18]
-
Kianifar, Ali
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
-
Kiuchi, Manabo
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
M
-
Mahmoudi, Mojtaba
The effect of material degradation on the bending of laminated plates [Volume 34, Issue 2, 2022, Pages 1-14]
-
Mazdak, Siamak
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Moetakef-Imani, Behnam
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
-
Mohammad Ebrahim, Abolfazl
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Mohammadi, Meisam
The effect of material degradation on the bending of laminated plates [Volume 34, Issue 2, 2022, Pages 1-14]
-
Mohammadpour Hamedani, Ehsaneh
The Effect of Winkler-Pasternak Foundation Coefficients on the Natural Frequency of Cylindrical Lattice Structures Using Galerkin Method [Volume 34, Issue 3, 2022, Pages 19-34]
-
Moslemi Naeini, Hassan
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Mozaffari-Jovein, Mehran
Identification of electromagnetic linear motor parameters in order to generate inertial force using ARM microcontroller [Volume 34, Issue 2, 2022, Pages 87-98]
N
-
Nazif, HamidReza
Numerical Analysis of the Hydrodynamic Behavior of Three-Phase Mixing of Rice Husk, Sand and Air in a Bubbling Fluidized Bed with Particle Granular Behavior [Volume 34, Issue 2, 2022, Pages 61-86]
-
Nemati, Mohammad
Non Newtonian conjugate heat transfer under the impact of uniform and non-uniform magnetic field along with heat absorption/production inside a two-dimensional chamber containing a block at different temperatures; An entropy analysis with LBM [Volume 34, Issue 3, 2022, Pages 35-66]
O
-
Oveisi, Mehdi
Numerical study of the effect of geometry and metal foam on the energy absorption of nested profiles [Volume 34, Issue 3, 2022, Pages 67-78]
R
-
Rabiee, Amir hossein
Applying Suction and Blowing Flow Control Approaches to Reduce the Flow-induced Instabilities of Elastically-mounted Square Cylinder [Volume 34, Issue 2, 2022, Pages 29-44]
-
Razavikia, Mohammadamin
Investigation of the Effect of Geometric Defects and Temperature Changes on the Fracture Behavior of Boron Carbide Monocrystalline Structure by Molecular Dynamics [Volume 34, Issue 1, 2022, Pages 37-48]
-
Rezaei Sangtabi, Ahmad
Improving the gas flow distribution in a PEMFC stack by removing liquid water from the manifold [Volume 34, Issue 3, 2022, Pages 1-14]
S
-
Samimi Akhijahani, Hadi
Thermofluid Numerical simulation of the flat solar heating transpired collector for drying purposes [Volume 34, Issue 1, 2022, Pages 61-80]
-
Shakhesi, Saeed
Calculating the Added Mass Matrix of an Airship Using Boundary Element Method [Volume 34, Issue 2, 2022, Pages 15-28]
-
Sheikhzadeh, Ghanbar Ali
Flow prediction in two-dimensional asymmetric diffuser by neural network and comparison with three turbulence models and experimental data [Volume 34, Issue 2, 2022, Pages 45-60]
-
Soltani, Farid
Flow prediction in two-dimensional asymmetric diffuser by neural network and comparison with three turbulence models and experimental data [Volume 34, Issue 2, 2022, Pages 45-60]
T
-
Tadjfar, Mehran
Investigation of the impact of blowing jet on the dynamic stall of NACA0012 [Volume 34, Issue 1, 2022, Pages 1-20]
-
Tajdari, Mahdi
Effect of Flower Pattern on Uniform Distribution of Force on Rollers in Reshaping of Cold Roll Forming [Volume 34, Issue 1, 2022, Pages 49-60]
-
Talebi, Mansour
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2023, Pages 89-104]
Y
-
Yarinezhad, Amir
Investigating the Effect of Phase Change Materials on Energy Consumption in Lightweight Prefabricated Relief Buildings [Volume 34, Issue 4, 2023, Pages 35-52]
Z
-
Zamani mohiabadi, Mostafa
Flow prediction in two-dimensional asymmetric diffuser by neural network and comparison with three turbulence models and experimental data [Volume 34, Issue 2, 2022, Pages 45-60]
-
Zarepoor, Gholamreza
Numerical Model Development of Dummy Fuel Rod Under New Spacer Grids and End Constraints Using Experimental Modal Analysis [Volume 34, Issue 4, 2023, Pages 89-104]
Your query does not match with any item