Author Index

A

  • Aalipour, Mohammad Nonlinear Control of Motion of A Spherical Robot on Inclined Surfaces Based on Feedback Linearization Method [Volume 31, Issue 2, 2020, Pages 91-104]
  • Abbasi Tabrizi, Ehsan Numerical Simulation of the Heat-Fluid Flow Behavior Around the Cylinder with the Controller Wire [Volume 31, Issue 2, 2020, Pages 105-126]
  • Adibi, Tohid Numerical Simulation of the Heat-Fluid Flow Behavior Around the Cylinder with the Controller Wire [Volume 31, Issue 2, 2020, Pages 105-126]
  • Ahmadi, Bijan The Electric Response of Piezoelectric Beam Using Dynamic Stiffness Method [Volume 31, Issue 2, 2020, Pages 127-140]
  • Allahverdizadeh, Akbar Nonlinear Vibration Analysis of Fluid Conveying Microtube under Parametric Magnetic Excitation [Volume 31, Issue 1, 2020, Pages 69-86]
  • Ardekani, Ehsan Experimental Investigation on Flow Downstream of a Square Bluff Body at Different Angles [Volume 31, Issue 2, 2020, Pages 177-187]
  • Ardekani, Mohammad Ali Experimental Investigation on Flow Downstream of a Square Bluff Body at Different Angles [Volume 31, Issue 2, 2020, Pages 177-187]
  • Ashrafizadeh, Ali Comparison of Monolithic and Partitioned Approaches for the Solution of Fluid-Solid Thermal Interaction Problems [Volume 31, Issue 1, 2020, Pages 23-38]
  • Azimzadeh, Hamid Nonlinear Vibration Analysis of Fluid Conveying Microtube under Parametric Magnetic Excitation [Volume 31, Issue 1, 2020, Pages 69-86]

B

  • Babaeyan, Mohammad Reza Experimental Investigation of the Influence of Transverse Dual protuberances on the Thrust Vector of a Supersonic C-D nozzle [Volume 31, Issue 1, 2020, Pages 139-154]
  • Bayati Nezhad, Mohammad Amir Electrochemical-Thermal Simulation of Cell Lithium-Ion Battery of Electrical Vehicle [Volume 31, Issue 2, 2020, Pages 33-52]

D

  • Dadashzadeh, Behnam Nonlinear Vibration Analysis of Fluid Conveying Microtube under Parametric Magnetic Excitation [Volume 31, Issue 1, 2020, Pages 69-86]
  • Davazdah Emami, Mohsen Umerical Simulation of Elbow Erosion with Circumferential Welding in Two-Phase Gas Flow [Volume 31, Issue 2, 2020, Pages 141-156]

F

  • Farhadi, Faezeh A New Mathematical Model Gas Flows in Pipeline with Leak [Volume 31, Issue 1, 2020, Pages 155-164]
  • Farhangdoost, Khlil Effect of V-notch Depth on Fracture Toughness and the Plastic Region of the Crack Tip Using Charpy Impact Test Data in API X65 Steel [Volume 31, Issue 2, 2020, Pages 19-32]
  • Fathi, Borzoo The Effects of Revolute Joint Clearance on the Kinematic Behavior of the 3RPR Planar Parallel Manipulator [Volume 31, Issue 1, 2020, Pages 39-52]

H

  • Haji Aboutalebi, Farhad A Novel Method to Improve Crack Detection Ability in Helical Gear [Volume 31, Issue 1, 2020, Pages 1-12]
  • Haji Khan Mirzaei, Amir Numerical Investigation of Drag Reduction Mechanism in Laminar Flow Regime using Rectangular Riblets [Volume 31, Issue 1, 2020, Pages 165-173]
  • Hosseini, Farnaz Umerical Simulation of Elbow Erosion with Circumferential Welding in Two-Phase Gas Flow [Volume 31, Issue 2, 2020, Pages 141-156]
  • Hosseinzadeh, Ali Effect of V-notch Depth on Fracture Toughness and the Plastic Region of the Crack Tip Using Charpy Impact Test Data in API X65 Steel [Volume 31, Issue 2, 2020, Pages 19-32]

J

  • Jabbari, Majid The Electric Response of Piezoelectric Beam Using Dynamic Stiffness Method [Volume 31, Issue 2, 2020, Pages 127-140]

K

  • Karimpour, Hossein Nonlinear Control of Motion of A Spherical Robot on Inclined Surfaces Based on Feedback Linearization Method [Volume 31, Issue 2, 2020, Pages 91-104]
  • Khodabandeh, Mahdi Variable-Pitch Control of a Quadrotor Using Feedback Linearization Controller and Direct Adaptive Feedback Linearization Controller [Volume 31, Issue 2, 2020, Pages 67-90]
  • Khosravi, Mohammad The Grafting of a Nylon Fiber Surface by a Mixture of Two Acrylic Monomers and the Evaluation of Optimum Values by using a Traditional Design of Experiment Software [Volume 31, Issue 1, 2020, Pages 39-52]

M

  • Maraki, Mohammadreza Effect of V-notch Depth on Fracture Toughness and the Plastic Region of the Crack Tip Using Charpy Impact Test Data in API X65 Steel [Volume 31, Issue 2, 2020, Pages 19-32]
  • Meghdadi, Amir Homayoon Umerical Simulation of Elbow Erosion with Circumferential Welding in Two-Phase Gas Flow [Volume 31, Issue 2, 2020, Pages 141-156]
  • Mohammadi, Arash Influence of Alumina Nanoparticles on the Combustion Process with the Help of Homogeneity Factor in a Compression Ignition Engine [Volume 31, Issue 2, 2020, Pages 157-175]
  • Mohammadi, Arash Electrochemical-Thermal Simulation of Cell Lithium-Ion Battery of Electrical Vehicle [Volume 31, Issue 2, 2020, Pages 33-52]
  • Mohammadi, Kourosh Application of SSPH Method in Free Vibration Analysis of Graphene [Volume 31, Issue 2, 2020, Pages 53-66]
  • Mohseni, Ebrahim Umerical Simulation of Elbow Erosion with Circumferential Welding in Two-Phase Gas Flow [Volume 31, Issue 2, 2020, Pages 141-156]
  • Mokhtarian, Ali Nonlinear Control of Motion of A Spherical Robot on Inclined Surfaces Based on Feedback Linearization Method [Volume 31, Issue 2, 2020, Pages 91-104]
  • Mosalsal, Maryam Variable-Pitch Control of a Quadrotor Using Feedback Linearization Controller and Direct Adaptive Feedback Linearization Controller [Volume 31, Issue 2, 2020, Pages 67-90]

N

  • Najari, Nasim Umerical Simulation of Elbow Erosion with Circumferential Welding in Two-Phase Gas Flow [Volume 31, Issue 2, 2020, Pages 141-156]

O

  • Ostad Movahed, Saeed The Grafting of a Nylon Fiber Surface by a Mixture of Two Acrylic Monomers and the Evaluation of Optimum Values by using a Traditional Design of Experiment Software [Volume 31, Issue 1, 2020, Pages 39-52]

P

  • Pouransari, Zeinab Large-Eddy Simulation of Turbulent Square Duct Flow [Volume 31, Issue 1, 2020, Pages 13-22]
  • Poursina, Mehrdad A Novel Method to Improve Crack Detection Ability in Helical Gear [Volume 31, Issue 1, 2020, Pages 1-12]

R

  • Raoufpanah, Alireza Numerical Investigation of Drag Reduction Mechanism in Laminar Flow Regime using Rectangular Riblets [Volume 31, Issue 1, 2020, Pages 165-173]
  • Razavi, Syad Esmail Numerical Simulation of the Heat-Fluid Flow Behavior Around the Cylinder with the Controller Wire [Volume 31, Issue 2, 2020, Pages 105-126]
  • Rezaei, Mohsen A Novel Method to Improve Crack Detection Ability in Helical Gear [Volume 31, Issue 1, 2020, Pages 1-12]
  • Rezaei, Yosef Experiments on the Formation Process of Bag Breakup Regime of Injected Liquid Jet into an Airstream [Volume 31, Issue 2, 2020, Pages 1-18]

S

  • Shokrollahi, Hasan Application of SSPH Method in Free Vibration Analysis of Graphene [Volume 31, Issue 2, 2020, Pages 53-66]
  • Soleimani, Mohsen Influence of Alumina Nanoparticles on the Combustion Process with the Help of Homogeneity Factor in a Compression Ignition Engine [Volume 31, Issue 2, 2020, Pages 157-175]

T

  • Tadjfar, Mehran Experiments on the Formation Process of Bag Breakup Regime of Injected Liquid Jet into an Airstream [Volume 31, Issue 2, 2020, Pages 1-18]
  • Teymourtash, AliReza Experimental Investigation on Flow Downstream of a Square Bluff Body at Different Angles [Volume 31, Issue 2, 2020, Pages 177-187]

V

  • Vahidifar, Fariba An Improved Shooting Method for a Class of Switching Optimal Control Problems [Volume 31, Issue 1, 2020, Pages 123-138]
  • Vahidinia, Farhad The Friction Factor of Turbulent Flow of the Base Fluid and Nanofluid in the Statistical Approach [Volume 31, Issue 1, 2020, Pages 105-122]
  • Varedi-Koulaei, S.M. The Effects of Revolute Joint Clearance on the Kinematic Behavior of the 3RPR Planar Parallel Manipulator [Volume 31, Issue 1, 2020, Pages 39-52]
  • Varmazyar, Mostafa Influence of Alumina Nanoparticles on the Combustion Process with the Help of Homogeneity Factor in a Compression Ignition Engine [Volume 31, Issue 2, 2020, Pages 157-175]

Z