Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Investigating the Effect of Structural Heterogeneity Model on the Buckling Capacity of Thin-Walled Porous Functionally Graded I-Beams and Channel Beams

Document Type : Original Article

Authors
Reza Jahangiri 1
Rasoul Ghanbari 2
Mikhail Naseri 3
Akbar Allahverdizadeh 4
Iraj Shakeri 5
1 Department of Mechanical Engineering, Islamic Azad University, Salmas Branch.
2 Faculty of Mechanical Engineering, University of Tabriz, Tabriz., Iran.
3 Department of Civil Engineering, Eslamic Azad University, Salmas branch.
4 Faculty of Mechanical Engineering, University of Tabriz, Tabriz
5 Department of Civil Engineering, Eslamic Azad University, Salmas branch
10.22067/jacsm.2025.92494.1322
Abstract
The modeling and prediction of the structural characteristics of thin-walled beams and columns are of significant importance due to the potential occurrence of lateral buckling under eccentric, concentrated, and distributed lateral loads. In the present study, by incorporating the effects of warping, heterogeneity, porosity, and based on Vlasov's assumptions and the application of Hamilton's principle, the governing characteristic equations for the lateral buckling of multi-layered thin-walled porous functionally graded I-beams and channel beams were introduced. Using the finite element method and describing the displacement components of points within the elements in terms of Lagrangian and Hermitian interpolation functions, the governing eigenvalue equation was solved numerically. To validate the results of this study, they were compared with other references. The effect of various parameters, particularly porosity index, mixing index, material modulus ratio, end-moment ratio, and cross-sectional strength parameter, on the load-bearing capacity of multilayer thin-walled beams under multiple boundary conditions was investigated. It was demonstrated that various parameters have an important role in determining the range of buckling instability.
Keywords
Vlasov'
s Assumptions
Functionally Graded Porous Beam
Lateral Buckling
Volume Fraction Index
Porosity Index
Subjects
[1]      N. D. Duc and T. Q. Quan, "Nonlinear stability analysis of double-curved shallow FGM panels on elastic foundations in thermal environments," Mechanics of Composite Materials, vol. 48, pp. 435-448, 2012. https://doi.org/10.1007/s11029-012-9289-z
[2]      T. M. Tu, T. H. Quoc, and N. Van Long, "Vibration analysis of functionally graded plates using the eight-unknown higher order shear deformation theory in thermal environments," Aerospace Science and Technology, vol. 84, pp. 698-711, 2019. https://doi.org/10.1016/j.ast.2018.11.010
[3]      T.-T. Nguyen, P. Thắng, and J. Lee, "Flexural-torsional stability of thin-walled functionally graded open-section beams," Thin-Walled Structures, vol. 110, 2017. https://doi.org/10.1016/j.tws.2016.09.021
[4]      B. Kieback, A. Neubrand, and H. Riedel, "Processing techniques for functionally graded materials," Materials Science and Engineering: A, vol. 362, no. 1-2, pp. 81-106, 2003. https://doi.org/10.1016/S0921-5093(03)00578-1
[5]      Y. Q. Wang and J. W. Zu, "Vibration characteristics of moving sigmoid functionally graded plates containing porosities," International Journal of Mechanics and Materials in Design, vol. 14, pp. 473-489, 2018. https://doi.org/10.1007/s10999-017-9385-2
[6]      W. Liu and J. N. DuPont, "Fabrication of functionally graded TiC/Ti composites by Laser Engineered Net Shaping," Scripta Materialia, vol. 48, no. 9, pp. 1337-1342, 2003. https://doi.org/10.1016/S1359-6462(03)00020-4
[7]      W. Yoshimi, I. Yoshifumi, H. Sato, and E. Miura-Fujiwara, "A Novel Fabrication Method for Functionally Graded Materials under Centrifugal Force: The Centrifugal Mixed-Powder Method," Materials, vol. 2, no. 4, pp. 2510-2525, 2009. https://doi.org/10.3390/ma2042510
[8]      G. Q. Jin and W. D. Li, "Adaptive rapid prototyping/manufacturing for functionally graded material-based biomedical models," The International Journal of Advanced Manufacturing Technology, vol. 65, pp. 97-113, 2013. https://doi.org/10.1007/s00170-012-4153-9
[9]      V. Kahya and M. Turan, "Finite element model for vibration and buckling of functionally graded beams based on the first-order shear deformation theory," Composites Part B: Engineering, vol. 109, pp. 108-115, 2017. https://doi.org/10.1016/j.compositesb.2016.10.039
[10] P. Phung-Van, Q. X. Lieu, H. Nguyen-Xuan, and M. Abdel Wahab, "Size-dependent isogeometric analysis of functionally graded carbon nanotube-reinforced composite nanoplates," Composite Structures, vol. 166, pp. 120-135, 2017. https://doi.org/10.1016/j.compstruct.2017.01.049
[11] V. Kahya and M. Turan, "Vibration and stability analysis of functionally graded sandwich beams by a multi-layer finite element," Composites Part B: Engineering, vol. 146, pp. 198-212, 2018. https://doi.org/10.1016/j.compositesb.2018.04.011
[12] M. Avcar and W. K. M. Mohammed, "Free vibration of functionally graded beams resting on Winkler-Pasternak foundation," Arabian Journal of Geosciences, vol. 11, no. 232, 2018. https://doi.org/10.1007/s12517-018-3579-2
[13[ T. Vo-Duy, V. Ho-Huu, and T. Nguyen-Thoi, "Free vibration analysis of laminated FG-CNT reinforced composite beams using finite element method," Frontiers of Structural and Civil Engineering, vol. 13, pp. 324-336, 2019. https://doi.org/10.1007/s11709-018-0466-6
[14] M. Avcar, "Free vibration of imperfect sigmoid and power law functionally graded beams," Steel and Composite Structures, vol. 30, pp. 603-615, 2019.
[15[ H. Alsaid Alwan and M. Avcar, "Analytical solution of free vibration of FG beam utilizing different types of beam theories: A comparative study," Computers and Concrete, vol. 26, pp. 285-292, 2020.
[16]    H. Babaei, Y. Kiani, and M. Reza Eslami, "Thermal buckling and post-buckling analysis of geometrically imperfect FGM clamped tubes on nonlinear elastic foundation," Applied Mathematical Modelling, vol. 71, pp. 12-30, 2019. https://doi.org/10.1016/j.apm.2019.02.009
[17]    H. Youzera, S. A. Meftah, M. M. Selim, and A. Tounsi, "Finite element method for axial and bending coupling effect on free vibration response of functionally graded beams under thermal environment," Mechanics of Advanced Materials and Structures, vol. 29, pp. 6436-6450, 2022.
[18] M. Wang, M. He, Z. Liang, D. Wu, Y. Wang, X. Qing, et al., "Fatigue damage monitoring of composite laminates based on acoustic emission and digital image correlation techniques," Composite Structures, vol. 321, p. 117239, 2023. https://doi.org/10.1016/j.compstruct.2023.117239
[19]    X. Xie, J. Bai, and W. Zuo, "Topology optimization of fiber-reinforced concrete structures using membrane-embedded model," Engineering Structures, vol. 314, p. 118299, 2024. https://doi.org/10.1016/j.compstruct.2023.117239
[20]    T. T. Nguyen, P. T. Thang, and J. Lee, "Lateral buckling analysis of thin-walled functionally graded open-section beams," Composite Structures, vol. 160, pp. 952-963, 2017. https://doi.org/10.1016/j.compstruct.2016.10.017
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.