Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Study and Finite Element Simulation of the Bistability Phenomenon in Cylindrical Fiber-Reinforced Laminated Composites

Document Type : Original Article

Authors
Hadi Gourabi 1
Shahram Hadian 2
1 Institute of Materials and Energy, Isfahan, Iran.
2 Faculty of Engineering, University of Isfahan, Isfahan, Iran
10.22067/jacsm.2024.89435.1284
Abstract
This study aims to investigate the Bi-Stability phenomenon in cylindrical fiber reinforced laminated composite shells. The origin of Bi-Stability behavior could be found in particular anti-symmetric layup sequence and fibers orientation. First, the kinematic and constitutive equations are derived, based on Classical Laminate Plate Theory (CLPT). Afterwards, the layup sequence and the way it leads to bending and twisting decoupling would be described. The Bi-Stability will be explained due to existence of one local minimum of strain energy, which indicates the second stable state of the plate. Analytical equations are introduced in order to calculate the cylindrical shell's total strain energy under pure bending and the second stable state geometry and characteristics are derived from the strain energy plots and the local strain energy minimum position, which is depicted in the plots. Furthermore, a finite element simulation will be performed in order to verify the presented theory to explain Bi-Stability phenomenon.
Keywords
Fiber reinforced laminated composites
Cylindrical shell
Antisymmetric layup sequence
Bistability
Strain energy
Subjects
[1]       S. S. Mojabi and M. M. Kheirikhah, “Modeling and intelligent control of vibration of cantilever composite plate embedded with shape memory alloy wires,” Journal of Science and Technology of Composites, vol. 4, no. 4, pp. 363–374, 2018. https://doi.org/10.22068/jstc.2018.28554
[2]       Z. Zamani and H. Haddadpour, “Static and dynamic analysis of composite thin walled beam with curvilinear fiber,” Journal of Science and Technology of Composites, vol. 6, no. 1, pp. 79–88, 2019. https://doi.org/10.22068/jstc.2018.91728.1463
[3]       K. Iqbal, S. Pellegrino, and A. Daton-Lovett, “Bi-stable composite slit tubes,” in IUTAM-IASS Symposium on Deployable Structures: Theory and Applications: Proceedings of the IUTAM Symposium held in Cambridge, UK, 6–9 September 1998, Springer, 2000, pp. 153–162. https://doi.org/10.1007/978-94-015-9514-8_17
[4]       K. Iqbal and S. Pellegrino, “Bi-stable composite shells,” in 41st Structures, Structural Dynamics, and Materials Conference and Exhibit held in Atlanta,GA, USA, 3- 6 April 2000, 2000, p. 1385. https://doi.org/10.2514/6.2000-1385
[5]       S. D. Guest and S. Pellegrino, “Analytical models for bistable cylindrical shells,” Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 462, no. 2067, pp. 839–854, 2006. https://doi.org/10.1098/rspa.2005.1598
[6]       T. W. Murphey and S. Pellegrino, “A novel actuated composite tape-spring for deployable structures,” in Proceedings 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, Palm Springs, CA, USA, Apr. 2004, p. 1528. https://doi.org/10.2514/6.2004-1528
[7]       E. Rivas Adrover, Deployable Structures, London, UK: Laurence King Publishing, 2015. https://doi.org/10.5040/9781780677958
[8]       F. Mehralian, “Analysis Cured Shape of Bistable Structures Using Analytical Method,” M. Sc., Shahrekord University.
[9]       A. Hajiesmaeili, “Analysis of Mechanical Behavior of Bistable Structures Using Finite Element Simulation,” M. Sc., Shahrekord University, Shahrekord, 2012.
[10]     T. W. Murphey, S. P. Lake, J. M. Fernandez, and S. Pellegrino, “High strain composites,” in Proceedings 2nd AIAA Spacecraft Structures Conference, Kissimmee, FL, USA, Jan. 2015, p. 0942. https://doi.org/10.2514/6.2015-0942
[11]    M. Shahryarifard, M. Golzar, and G. Tibert, “Toward thermal stimulation of shape memory polymer composite bistable tape springs,” Smart Materials and Structures, vol. 30, no. 2, p. 025030, 2021. https://doi.org/10.1088/1361-665X/abd342
[12]     A. Brinkmeyer, S. Pellegrino, and P. M. Weaver, “Effects of long-term stowage on the deployment of bistable tape springs,” Journal of Applied Mechanics, vol. 83, no. 1, p. 011008, 2016. https://doi.org/10.1115/1.4031618
[13]     A. Brinkmeyer, S. Pellegrino, P. M. Weaver, and M. Santer, “Effects of viscoelasticity on the deployment of bistable tape springs,” in 19th International Conference on Composite Materials (ICCM-19), Montreal, QC, Canada, July 2013, 2013, pp. 370–380.
[14]     M. E. Peterson and T. W. Murphey, “Large deformation bending of thin composite tape spring laminates,” in Proceedings 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, MA, USA, Apr. 2013, p. 1667. https://doi.org/10.2514/6.2013-1667
[15]     K. Kwok and S. Pellegrino, “Viscoelastic effects in tape-springs,” in Proceedings 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO, USA, Apr. 2011, AIAA Paper 2011-2022. https://doi.org/10.2514/6.2011-2022
[16]     F. Herlem, “Modelling and manufacturing of a composite bi-stable boom for small satellites,” M.Sc. thesis, Dept. Aeronautical and Vehicle Eng., KTH Royal Institute of Technology, Stockholm, Sweden, 2014.
[17]     H. Yang, R. Liu, Y. Wang, Z. Deng, and H. Guo, “Experiment and multiobjective optimization design of tape-spring hinges,” Structural and Multidisciplinary Optimization, vol. 51, no. 6, pp. 1231–1242, 2015. https://doi.org/10.1007/s00158-014-1205-9
[18]     H. Ye, Y. Zhang, Q. Yang, Y. Xiao, R. V. Grandhi, and C. C. Fischer, “Optimal design of a three tape-spring hinge deployable space structure using an experimentally validated physics-based model,” Structural and Multidisciplinary Optimization, vol. 56, no. 5, pp. 1301–1315, 2017. https://doi.org/10.1007/s00158-017-1810-5
[19]     T. W. Murphey, S. K. Jeon, A. Biskner, and G. E. Sanford, “Deployable booms and antennas using bi-stable tape-springs,” in Proceedings 24th Annual AIAA/USU Conference on Small Satellites, Logan, UT, USA, Aug. 2010.
[20]     H. Yang, H. Guo, R. Liu, S. Wang, and Y. Liu, “Coiling and deploying dynamic optimization of a C-cross section thin-walled composite deployable boom,” Structural and Multidisciplinary Optimization, vol. 61, no. 4, pp. 1731–1738, Apr. 2020. https://doi.org/10.1007/s00158-019-02429-x
[21]     H. M. Y. C. Mallikarachchi, “Predicting mechanical properties of thin woven carbon fiber reinforced laminates,” Thin-Walled Structures, vol. 135, pp. 297–305, 2019. https://doi.org/10.1016/j.tws.2018.11.016
[22]  H. M. Y. C. Mallikarachchi and S. Pellegrino, “Deployment dynamics of ultrathin composite booms with tape-spring hinges,” Journal of Spacecraft and Rockets, vol. 51, no. 2, pp. 604–617, 2014. https://doi.org/10.2514/1.A32401
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.