Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Electromechanical-Growth Model for Simulating Myocardial Concentric Hypertrophy in Systemic Hypertension

Document Type : Original Article

Authors
Soheila Shabani
Akbar Allahverdizadeh
Pezhman Namashiri
Faculty of Mechanical Engineering, University of Tabriz, Tabriz, Iran
10.22067/jacsm.2024.87993.1255
Abstract
Computational modeling of cardiovascular system is one of the important research areas that can be used to analyze the response of the heart in healthy and disease states. In this study, an integrated electromechanical-growth biventricular model has been developed to simulate concentric hypertrophy caused by systemic hypertension. By using Windkessel three-element blood circulation model and expanding the heart pressure model from previous studies, the pressure of the left and right ventricles was modeled. The implementation of concentric growth kinematics equations was developed from previous studies to be integrated with the electromechanical model. The model was fully implemented in COMSOL commercial finite element software and the validation was performed with previous studies. Results showed that the tissue grows to deal with critical stresses and reduces maximum stress magnitude. Furthermore, it was observed that the thickness of the left ventricular walls increases significantly in the disease and the ejection fraction decreases along with the end-diastolic volume of the heart. The presented model can be improved in future by including Purkinje fibers or using an extracted cardiac geometry from medical images.
Keywords
Cardiac Electromechanics
Growth
Hypertrophy
Systemic Hypertension
Finite Element Analysis
Subjects
[1] M. Haghighi Yazdi and J. Eskandari Jam, “Numerical Modeling of Linear Viscoelasticity in a Finite Element Method Software Package to be Used in Multiphysics Modeling,” Journal of Applied and Computational Sciences in Mechanics, vol. 25, no. 2, Oct., pp. 121-131, 2014. (In Persian) https://doi.org/10.22067/fum-mech.v25i2.24850.
[2] L. Lee, G. S. Kassab and J. M. Guccione, “Mathematical modeling of cardiac growth and remodeling,” Wiley Interdisciplinary Reviews: Systems Biology and Medicine, vol. 8, no. 3, pp. 211-226, 2016. https://doi.org/10.1002/wsbm.1330.
[3] V. Kumar, A. K. Abbas, N. Fausto and J. C. Aster, Robbins and Cotran Pathologic Basis of Disease, 10nd ed. Elsevier, 2020. [E-book] Available: shop.elsevier.com/books.
[4] I. Shimizu and T. Minamino, “Physiological and pathological cardiac hypertrophy,” Journal of Molecular and Cellular Cardiology, vol. 97, pp. 245-262, 2016. https://doi.org/10.1016/j.yjmcc.2016.06.001.
[5] R. Klabunde, Cardiovascular Physiology Concepts. Wolters Kluwer, 2021. [E-book] Available:  books.google.com.
[6] W. Grossman, D. Jones and L. McLaurin, “Wall stress and patterns of hypertrophy in the human left ventricle,”  Journal of Clinical Investigation, vol. 56, no. 1, pp. 56-64, 1975. https://doi.org/10.1172/JCI108079.
[7] E. K. Rodriguez, A. Hoger and A. D. McCulloch, “Stress-dependent finite growth in soft elastic tissues,” Journal of Biomechanics, vol. 27, no. 4, pp. 455-467, 1994. https://doi.org/10.1016/0021-9290(94)90021-3.
[8] S. Göktepe, O. J. Abilez and E. Kuhl, “A generic approach towards finite growth with examples of athlete's heart, cardiac dilation, and cardiac wall thickening,” Journal of the Mechanics and Physics of Solids, vol. 58, no. 10, pp. 1661-1680, 2010. https://doi.org/10.1016/j.jmps.2010.07.003.
[9] M. Rausch, A. Dam, S. Göktepe, O. Abilez and E. Kuhl, “Computational modeling of growth: systemic and pulmonary hypertension in the heart,” Biomechanics and Modeling in Mechanobiology, vol. 10, no. 6, pp. 799-811, 2011. https://doi.org/10.1007/s10237-010-0275-x.
[10] E. Berberoğlu, H. O. Solmaz and S. Göktepe, “Computational modeling of coupled cardiac electromechanics incorporating cardiac dysfunctions,” European Journal of Mechanics-A/Solids, vol. 48, pp. 60-73, 2014. https://doi.org/10.1016/j.euromechsol.2014.02.021.
[11] F. Del Bianco, P. C. Franzone, S. Scacchi and L. Fassina, “Electromechanical effects of concentric hypertrophy on the left ventricle: A simulation study,” Computers in Biology and Medicine, vol. 99, pp. 236-256, 2018. https://doi.org/10.1016/j.compbiomed.2018.06.004.
[12] L. Lamm, H. Holthusen, T. Brepols, S. Jockenhövel and S. Reese, “A macroscopic approach for stress-driven anisotropic growth in bioengineered soft tissues,” Biomechanics and Modeling in Mechanobiology, vol. 21, no. 2, pp. 627-645, 2022.
[13] B. Milićević, M. Milošević, V. Simić, A. Preveden, et al., “Machine learning and physical based modeling for cardiac hypertrophy,” Heliyon, vol. 9, no. 6, p. 16724, 2023. https://doi.org/10.1007/s10237-021-01554-1.
[14] P. Nardinocchi and L. Teresi, “Morphing of soft tubes by anisotropic growth,” Acta Mechanica, vol. 234, no. 1, pp. 37-50, 2023. https://doi.org/10.1007/s00707-021-03065-7.
[15] P. Namashiri, A. Allahverdizadeh and B. Dadashzadeh, “Modeling and Simulation of Growth in Diastolic Heart Failure,” Journal of Applied and Computational Sciences in Mechanics, vol. 35, no. 3, Oct., pp. 101-114, 2023. (In Persian) https://doi.org/10.22067/jacsm.2023.81490.1173.
[16] S. Davoodi, M. Esmaeili and H. Shokrollahi, “Numerical Study on the Thermal Stress caused by Laser Radiation on Healthy and Cancerous Skin Tissue,” Journal of Applied and Computational Sciences in Mechanics, vol. 32, no. 1, pp. 59-76, 2021. (In Persian) https://doi.org/10.22067/jacsm.2021.56871.0.
[17] B. Haghighi, H. Sadeghpour and M. shafiey, “Investigating the Effect of Different Positions of the Slot on Performance of Single-Slot and Double-Slot Coaxial Antenna in the Treatment of Cancer in Liver Tissue by Hyperthermia Method,” Journal of Applied and Computational Sciences in Mechanics, vol. 35, no. 3, Oct., pp. 17-32, 2023. (In Persian) https://doi.org/10.22067/jacsm.2023.76281.1114.
[18] P. Namashiri, A. Allahverdizadeh and B. Dadashzadeh, “Electromechanical Modeling of Aortic Valve Stenosis with Hyperelastic and Viscoelastic Properties of the Myocardium,” Journal of Mechanical Engineering of University of Tabriz, vol. 53, no. 2, pp. 155-164, 2023. )In Persian( https://doi.org/10.22034/jmeut.2023.56507.3274.
[19] A. Ahmad Bakir, “A multiphysics fluid-electromechanical finite element model of cardiac ventricles for simulation of pathologies and treatments,” PhD Thesis, University of New South Wales, Sydney, 2018. https://doi.org/10.26190/unsworks/3563.
[20] Y. Alharbi, A. Al Abed, A. A. Bakir, N. H. Lovell, et al., “Fluid structure computational model of simulating mitral valve motion in a contracting left ventricle,” Computers in Biology and Medicine, vol. 148, p. 105834, 2022. https://doi.org/10.1016/j.compbiomed.202.
[21] B. Cansız, L. A. Woodworth and M. Kaliske, “A simple phenomenological approach for myocardial contraction: formulation, parameter sensitivity study and applications in organ level simulations,” Mechanics of Soft Materials, vol. 3, no. 1, pp. 1-28, 2021. https://doi.org/10.1007/s42558-021-00033-y
[22] M. P. Nash and A. V. Panfilov, “Electromechanical model of excitable tissue to study reentrant cardiac arrhythmias,” Progress in Biophysics and Molecular Biology, vol. 85, no. 2-3, pp. 501-522, 2004. https://doi.org/10.1016/j.pbiomolbio.2004.01.016.
[23] R. R. Aliev and A. V. Panfilov, “A simple two-variable model of cardiac excitation,” Chaos, Solitons & Fractals, vol. 7, no. 3, pp. 293-301, 1996. https://doi.org/10.1016/0960-0779(95)00089-5.
[24] A. Ahmad Bakir, A. Al Abed, M. C. Stevens, N. H. Lovell and S. Dokos, “A multiphysics biventricular cardiac model: Simulations with a left-ventricular assist device,” Frontiers in Physiology, vol. 9, pp. 1259, 2018. https://doi.org/10.3389/fphys.2018.01259.
[25] M. Genet, L. C. Lee, B. Baillargeon, J. M. Guccione and E. Kuhl, “Modeling pathologies of diastolic and systolic heart failure,” Annals of Biomedical Engineering, vol. 44, no. 1, pp. 112-127, 2016. https://doi.org/10.1007/s10439-015-1351-2.
[26] M. Peirlinck, F. S. Costabal, J. Yao, J. Guccione, et al., “Precision medicine in human heart modeling: Perspectives, challenges, and opportunities,” Biomechanics and Modeling in Mechanobiology, vol. 20, pp. 803-831, 2021. https://doi.org/10.1007/s10237-021-01421-z.
[27] E. Berberog̃lu and S. Göktepe, “Computational modeling of myocardial infarction,” Procedia IUTAM, vol. 12, pp. 52-61, 2015. https://doi.org/10.1016/j.piutam.2014.12.007.
[28] G. A. Holzapfel and R. W. Ogden, “Constitutive modelling of passive myocardium: a structurally based framework for material characterization,” Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, vol. 367, no. 1902, pp. 3445-3475, 2009. https://doi.org/10.1098/rsta.2009.0091.
[29] P. Namashiri, A. Allahverdizadeh and B. Dadashzadeh, “Modeling and Simulation of Myocardial Hyperelastic and Viscoelastic Properties with Incorporation of Active Stress,” Modares Mechanical Engineering, vol. 23, no. 9, pp. 553-565, 2023. (In Persian) http://dx.doi.org/10.22034/mme.23.9.553.
[30] T. P. Usyk, I. J. LeGrice and A. D. McCulloch, “Computational model of three-dimensional cardiac electromechanics,” Computing and Visualization in Science, vol. 4, pp. 249-257, 2002. https://doi.org/10.1007/s00791-002-0081-9.
[31] F. Regazzoni, M. Salvador, P. C. Africa, M. Fedele, L. Dedè and A. Quarteroni, “A cardiac electromechanical model coupled with a lumped-parameter model for closed-loop blood circulation,” Journal of Computational Physics, vol. 457, p. 111083, 2022. https://doi.org/10.1016/j.jcp.2022.111083.
[32] J. Arumugam, J. Mojumder, G. Kassab and L. C. Lee, “Model of anisotropic reverse cardiac growth in mechanical dyssynchrony,” Scientific Reports, vol. 9, no. 1, pp. 12670, 2019. https://doi.org/10.1038/s41598-019-48670-8.
[33] C. Xi, C. Latnie, X. Zhao, J. L. Tan, et al., “Patient-specific computational analysis of ventricular mechanics in pulmonary arterial hypertension,” Journal of Biomechanical Engineering, vol. 138, no. 11, p. 111001, 2016. https://doi.org/10.1115/1.4034559.
[34] C. Luo, D. Ware, J. Zwischenberger and J. Clark, “Using a human cardiopulmonary model to study and predict normal and diseased ventricular mechanics, septal interaction, and atrio-ventricular blood flow patterns,” Cardiovascular Engineering, vol. 7, pp. 17-31, 2007. https://doi.org/10.1007/s10558-007-9025-9.
[35] W. Grossman, “Cardiac hypertrophy: useful adaptation or pathologic process?,” The American Journal of Medicine, vol. 69, no. 4, pp. 576-584, 1980. https://doi.org/10.1016/0002-9343(80)90471-4.
[36] J. Loscalzo, Harrison's cardiovascular medicine. McGraw Hill/Medical, 2016. [E-book] Available: abebooks.co.uk.
[37] B. Cansız, H. Dal and M. Kaliske, “Computational cardiology: a modified Hill model to describe the electro-visco-elasticity of the myocardium,” Computer Methods in Applied Mechanics and Engineering, vol. 315, pp. 434-466, 2017. https://doi.org/10.1016/j.cma.2016.10.009.
[38] M. Di Donato, P. Dabic, S. Castelvecchio, C. Santambrogio, et al., “Left ventricular geometry in normal and post-anterior myocardial infarction patients: sphericity index and ‘new’conicity index comparisons,” European Journal of Cardio-Thoracic Surgery, vol. 29, pp. S225-S230, 2006. https://doi.org/10.1016/j.ejcts.2006.03.002.
[39] H. Tandri, S. K. Daya, K. Nasir, C. Bomma, et al., “Normal reference values for the adult right ventricle by magnetic resonance imaging,” The American Journal of Cardiology, vol. 98, no. 12, pp. 1660-1664, 2006. https://doi.org/10.1016/j.amjcard.2006.07.049.
[40] L. E. Hudsmith, S. E. Petersen, J. M. Francis, M. D. Robson and S. Neubauer, “Normal human left and right ventricular and left atrial dimensions using steady state free precession magnetic resonance imaging,” Journal of Cardiovascular Magnetic Resonance, vol. 7, no. 5, pp. 775-782, 2005. https://doi.org/10.1080/10976640500295516.
[41] J. W. Lankhaar, N. Westerhof, T. J. Faes, K. M. Marques, et al., “Quantification of right ventricular afterload in patients with and without pulmonary hypertension,” American Journal of Physiology-Heart and Circulatory Physiology, vol. 291, no. 4, pp. H1731-H1737, 2006. https://doi.org/10.1152/ajpheart.00336.2006.
[42] S. Torbati, “Computational modeling of heart growth: ventricular hypertrophy,” MSc Thesis, University of Tehran, Tehran, 2018. (In Persian)
[43] B. M. Pluim, A. H. Zwinderman, A. van der Laarse and E. E. van der Wall, “The athlete’s heart: a meta-analysis of cardiac structure and function,” Circulation, vol. 101, no. 3, pp. 336-344, 2000. https://doi.org/10.1161/01.CIR.101.3.336.
[44] C. Mihl, W. Dassen and H. Kuipers, “Cardiac remodelling: concentric versus eccentric hypertrophy in strength and endurance athletes,” Netherlands Heart Journal, vol. 16, pp. 129-133, 2008. https://doi.org/10.1007/BF03086131.
[45] L. H. Opie, Heart physiology: from cell to circulation, 4th ed. Lippincott Williams & Wilkins, 2004. [E-book] Available: search.worldcat.org.
[46] B. Maron, W. McKenna, G. Danielson, L. Kappenberger, et al., “American College of Cardiology Foundation Task Force on Clinical Expert Consensus Documents; European Society of Cardiology Committee for Practice Guidelines. American college of cardiology/european society of cardiology clinical expert consensus documen on hypertrophic cardiomyopathy,” European Heart Journal, vol. 24, pp. 1965-1991, 2003. https://doi.org/10.1016/S0735-1097(03)00941-0.
[47] S. Torbati and A. Daneshmehr, “Numerical Modeling of Concentric Left Ventricular Hypertrophy of the Human Heart,” Modares Mechanical Engineering, vol. 19, no. 10, Oct., pp. 2491-2498, 2019. (In Persian)
[48] L. C. Lee, J. Sundnes, M. Genet, J. F. Wenk and S. T. Wall, “An integrated electromechanical-growth heart model for simulating cardiac therapies,” Biomechanics and Modeling in Mechanobiology, vol. 15, pp. 791-803, 2016. https://doi.org/10.1007/s10237-015-0723-8.
[49] M. Eskandari and E. Kuhl, “Systems biology and mechanics of growth,” Wiley Interdisciplinary Reviews: Systems Biology and Medicine, vol. 7, no. 6, pp. 401-412, 2015. https://doi.org/10.1002/wsbm.1312.
[50] M. Jessup and S. Brozena, “Heart failure,” The New England Journal of Medicine, vol. 348, no. 20, pp. 2007-2018, 2003. https://doi.org/10.3390/jcm13030829.
[51] K. Chatterjee and B. Massie, “Systolic and diastolic heart failure: differences and similarities,” Journal of Cardiac Failure, vol. 13, no. 7, pp. 569-576, 2007. https://doi.org/10.1016/j.cardfail.2007.04.006.
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.