Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Study of the Effect of Process Parameters and Optimization of Bending Angle in Laser Bending

Document Type : Original Article

Authors
Aliakbar Asgharpour
Mohammad Bakhshi
Hamid Gorji
Faculty of Mechanical Engineering, Babol Noshirvani University of Technology, Babol, Iran
10.22067/jacsm.2023.82668.1185
Abstract
The laser forming process is an emerging area of research and industry, primarily focused on materials like titanium, magnesium, steel, and their alloys. However, aluminum alloys have received less attention due to challenges related to surface reflection and low absorption coefficients.

In this research, the effect of different process parameters on bending angle in the laser bending of Al 6061 sheets was investigated by experiments and finite element simulation. The parameters were optimized by Response Surface Method (RSM) to achieve the maximum bending angle. In addition, the reproducibility of the process, as well as the accuracy and validation of the simulation, were examined by conducting experiments that involved accurate measurement of the bending angle. The results revealed that the sheet thickness had the most significant effect on the bending angle. Specifically, with an increase of 1 mm in the sheet thickness, the bending angle decreased by 77%. Additionally, through process parameter optimization, the maximum bending angle achieved was 4.911 degrees.
Keywords
Laser bending
Optimization
Bending angle
Finite Element simulation (FEM)
Response Surface Method (RSM)
Subjects
[1] M. Geiger, F. Vollertsen, and G. Deinzer, "Flexible straightening of car body shells by laser forming", SAE Technical Paper, 1993. https://doi.org/10.4271/930279
[2] Y. Shi, H. Shen, Z. Yao, and J. Hu, "Numerical investigation of straight-line laser forming under the temperature gradient mechanism", Acta Metallurgica Sinica (English Letters), vol. 19, no. 2, pp. 144-150, 2006. https://doi.org/10.1016/S1006-7191(06)60036-7
[3] W. Shichun, and Z. Jinsong, "An experimental study of laser bending for sheet metals", Journal of Materials Processing Technology, vol. 110, no. 2, pp. 160-163, 2001. https://doi.org/10.1016/S0924-0136(00)00860-8
[4] Z. Hu, R. Kovacevic, and M. Labudovic, "Experimental and numerical modeling of buckling instability of laser sheet forming", International Journal of Machine Tools and Manufacture, vol. 42, no. 13, pp. 1427-1439, 2002. https://doi.org/10.1016/S0890-6955(02)00075-5
[5] Y. Guan, H. Zhang, J. Liu, and S. Sun, "Laser micro-bending process based on the characteristic of the laser polarization", Journal of Materials Processing Technology, vol. 212, no. 3, pp. 662-671, 2012. https://doi.org/10.1016/j.jmatprotec.2011.07.010
[6] M. Geiger, and F. Vollertsen, "The mechanisms of laser forming", CIRP Annals, vol. 42, no. 1, pp. 301-304, 1993. https://doi.org/10.1016/S0007-8506(07)62448-2
[7] Y. Namba, "Laser forming in space", in: Proceedings of the International Conference on Lasers' 85, Las Vegas, NV; 2-6 Dec, pp. 403-407, 1986.
[8] M. Riahi, M. Hoseinpour Gollo, and S. Nader Ameli Kalkhoran, "Experimental and numerical study of heat flux distribution in laser forming of bi-layer sheets", Journal of Computational & Applied Research in Mechanical Engineering (JCARME), vol. 4, no. 1, pp. 67-79, 2014. https://doi.org/10.22061/jcarme.2014.73
[9] Y. Guan, S. Sun, G. Zhao, and Y. Luan, "Influence of material properties on the laser-forming process of sheet metals", Journal of Materials Processing Technology, vol. 167, no. 1, pp. 124-131, 2005. https://doi.org/10.1016/j.jmatprotec.2004.10.003
[10] M. Safari, and H. Mostaan, "Experimental and numerical investigation of laser forming of cylindrical surfaces with arbitrary radius of curvature", Alexandria Engineering Journal, vol. 55, no. 3, pp. 1941-1949, 2016. https://doi.org/10.1016/j.aej.2016.07.033
[11] M. H. Gollo, S. M. Mahdavian, and H. M. Naeini, "Statistical analysis of parameter effects on bending angle in laser forming process by pulsed Nd: YAG laser", Optics & Laser Technology, vol. 43, no. 3, pp. 475-482, 2011. https://doi.org/10.1016/j.optlastec.2010.07.004
[12] S. Mulay, V. Paliwal, and N. R. Babu, "Analytical approach to predict the bend angle of sheet formed by multiple laser scans", Procedia CIRP, vol. 99, pp. 272-277, 2021. https://doi.org/10.1016/j.procir.2021.03.040
[13] R. Boonpuang, M. Mongkolwongroj, A. Sakulkalavek, and R. Sakdanuphab, "Empirical modeling and optimization of laser bending process parameters using the central composite design method for HDD slider PSA/RSA adjustment", Lasers in Manufacturing and Materials Processing, vol. 7, pp. 290-304, 2020. https://doi.org/10.1007/s40516-020-00122-2
[14] A. Behera, P. S. Sahu, and S. K. Patel, "Application of Taguchi methodology for optimization of process parameters in laser bending of Al sheet", Materials Today: Proceedings, vol. 26, pp. 2323-2327, 2020. https://doi.org/10.1016/j.matpr.2020.02.500
[15] K. Venkadeshwaran, S. Das, and D. Misra, "Bend angle prediction and parameter optimisation for laser bending of stainless steel using FEM and RSM", International Journal of Mechatronics and Manufacturing Systems, vol. 5, no. 3-4, no. 3-4, pp. 308-321, 2021. https://doi.org/10.1504/IJMMS.2012.048237
[16] E. G. Zahrani, and A. Marasi, "Modeling and optimization of laser bending parameters via response surface methodology", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 227, no. 7, pp. 1577-1584, 2013. https://doi.org/10.1177/0954406212461119
[17] A. H. Roohi, H. Moslemi Naeini, and M. Hoseinpour Gollo, "An experimental investigation of parameters effect on laser forming of Al6061-T6 sheets", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 231, no. 5, pp. 433-442, 2015. https://doi.org/10.1177/1464420715599181
[18] A. H. Roohia, H. Moslemi Naeini, M. Hoseinpour Gollo, J. Shahbazai Karimi, and Sh. Imani shahabad, "Effects of temperature gradient magnitude on bending angle in laser forming process of aluminium alloy sheets", Journal of Computational and Applied Research in Mechanical Engineering (JCARME), vol. 5, no. 2, pp. 97-109, 2016. https://doi.org/10.22061/jcarme.2016.423
[19] S. E. Khandandel, S. M. H, Seyedkashi, and M. Moradi, "A novel path strategy design for precise 2D and 3D laser tube forming process; experimental and numerical investigation", Optik, vol. 206, pp. 164302, 2020. https://doi.org/10.1016/j.ijleo.2020.164302
[20] S. E. Khandandel, S. M. H. Seyedkashi and M. Moradi, "Numerical and experimental analysis of the effect of forced cooling on laser tube forming", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 43, no. 7, pp. 338, 2021. https://doi.org/10.1007/s40430-021-03063-9
[21] M, A, Bhatti, "Fundamental finite element analysis and applications: with Mathematica and Matlab computations", 2005.
[22] J. Zimmerman, W. Wlosinski, and Z. R. Lindemann, "Thermo-mechanical and diffusion modelling in the process of ceramic–metal friction welding", Journal of Materials Processing Technology, vol. 209, no. 4, pp. 1644-1653, 2009. https://doi.org/10.1016/j.jmatprotec.2008.04.012
[23] E. G. Zahrani, and A. Marasi, "Experimental investigation of edge effect and longitudinal distortion in laser bending process", Optics & Laser Technology, vol. 45, pp. 301-307, 2013. https://doi.org/10.1016/j.optlastec.2012.06.031
[24] R. H. Myers, D. C. Montgomery, and C. M. Anderson-Cook, “Response surface methodology: process and product optimization using designed experiments,” John Wiley & Sons, 2016.
[25] D. C. Montgomery, “Design and analysis of experiments”, John wiley & sons, 2017.
 
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.