Journal Of Applied and Computational Sciences in Mechanics

Journal Of Applied and Computational Sciences in Mechanics

Experimental and Theoretical Investigation of Young's Modulus of Breast Cancer Tissue (MCF-10) Using Different Cantilevers of Atomic Force Microscope

Document Type : Original Article

Authors
Moein Taheri 1
Ali Jabbari 2
Zahrasadat Eghdami 2
hamed faraji 3
Nima Rahmani 3
1 Mechanical Engineering, Arak University, Arak, Iran.
2 Department of Manufacturing, Faculty of Engineering, Arak University, Arak, Iran.
3 Department of Mechanical Engineering, Faculty of Engineering, Arak University, Arak
10.22067/jacsm.2023.83806.1196
Abstract
Today, the atomic force microscope has various applications in the manufacture of small-scale parts and the study of their mechanical properties. The study of mechanical properties of tissues can be considered as biomarkers for early detection of cancer and help in new treatments. There are diferent ways to detect cancerous tissues, and one of these ways is to check Young’s modulus of the tissue. One of the most recent methods for extracting Young's modulus in biological tissues is the use of atomic force microscopy. In this study, atomic force microscope was first used to extract Young's modulus of MCF-10 breast cancer tissue using 3 different cantilevers with rectangular, V-shaped and dagger geometries. The geometry of the cell was also assumed to be spherical according to the images obtained by atomic force microscopy. The force- indentation depth diagram was plotted by averaging the experimental results for each of the cantilevers separately. Finally, Young's modulus of breast cancer tissue for 3 cantilevers with rectangular, V-shaped and dagger geometries is extracted with Hertz contact model. By comparing the experimental and theoretical results and by changing the assumed range of Young's modulus for all 3 geometries of the cantilevers, it was observed that the use of V-shaped pole predicts a more accurate range of Young's modulus due to applying less force to the tissue. Young's modulus of breast cancer was considered between 1200 and 1250 (Pa) using V-shaped cantilevers.
Keywords
Atomic force microscope
MCF-10 cancer tissue
Rectangular cantilevers
Dagger cantilevers
V-shaped cantilevers
Subjects
[1]    M. Taheri and m. mirzaluo, "Theoretical and Experimental Simulation of Young Modulus Extraction of Breast MCF-10 Cells Using Atomic Force Microscope," Modares Mechanical Engineering, vol. 22, no. 1, pp. 37-45, (2021). (in Persian)
[2]    M. Taheri and M. Mirzaluo, "Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models," Amirkabir Journal of Mechanical Engineering, vol. 53, no. 12, pp. 5769-5784, (2022). (in Persian)
[3]    I. Guido, M. S. Jaeger, and C. Duschl, "Dielectrophoretic stretching of cells allows for characterization of their mechanical properties," European Biophysics Journal, vol. 40, no. 3, pp. 281-288, (2011).
[4]    M. Taheri, h. faraji, and P. Karimi, "Manipulation of breast cell tissue with the aim of calculating Young's modulus, using Tatara contact theory and atomic force microscopy," Journal Of Applied and Computational Sciences in Mechanics, pp. -, (2023). (in Persian)
[5]    Y. Wang et al., "Quantitative analysis of the cell-surface roughness and viscoelasticity for breast cancer cells discrimination using atomic force microscopy," Scanning, vol. 38, no. 6, pp. 558-563, (2016).
[6]    M. Li, L. Liu, N. Xi, and Y. Wang, "Atomic force microscopy studies on cellular elastic and viscoelastic properties," Science China Life Sciences, vol. 61, no. 1, pp. 57-67, (2018).
[7]    J. Iturri, A. Weber, A. Moreno-Cencerrado, M. D. Vivanco, R. Benítez, S. Leporatti, J. L. Toca-Herrera, "Resveratrol-induced temporal variation in the mechanical properties of MCF-7 breast cancer cells investigated by atomic force microscopy, " International journal of molecular sciences, vol. 20, no. 13, 3275, (2019).‏ https://doi.org/10.3390/ijms20133275
 [8]   M. Taheri and H. Faraji, "Extraction of force and critical time of three-dimensional manipulation of colon cancer tissue with different models of Persson friction," Journal of Solid and Fluid Mechanics, vol. 12, no. 6, pp. 113-123, 2023. (in Persian)
[9]    M. Mirzaluo, F. Fereiduni, M. Taheri, and M. Modabberifar, "Experimental extraction of Young’s modulus of MCF-7 tissue using atomic force microscopy and the spherical contact models," European Biophysics Journal, vol. 52, no. 1, pp. 81-90, 2023.
[10] J. Rother, H. Nöding, I. Mey, and A. Janshoff, "Atomic force microscopy-based microrheology reveals significant differences in the viscoelastic response between malign and benign cell lines," Open Biol, vol. 4, no. 5, p. 140046, 2014.
[11] M. Li, N. Xi, Y.-c. Wang, and L.-q. Liu, "Atomic force microscopy for revealing micro/nanoscale mechanics in tumor metastasis: from single cells to microenvironmental cues," Acta Pharmacologica Sinica, vol. 42, no. 3, pp. 323-339, 2021.
[12] A. H. Kulkarni, A. Chatterjee, P. Kondaiah, and N. Gundiah, "TGF-β induces changes in breast cancer cell deformability," Phys Biol, vol. 15, no. 6, p. 065005, 2018.
[13] M. H. Korayem, Y. H. Sooha, and Z. Rastegar, "MCF-7 cancer cell apparent properties and viscoelastic characteristics measurement using AFM," Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 6, p. 297, 2018.
[14] M. H. Korayem, S. Shahali, and Z. Rastegar, "Experimental determination of folding factor of benign breast cancer cell (MCF10A) and its effect on contact models and 3D manipulation of biological particles," Biomech Model Mechanobiol, vol. 17, no. 3, pp. 745-761, 2018.
[15] M. Habibnejad Korayem, S. Dehghani Ghahnaviyeh, M. Ghasemi, and M. Taheri, "Effect of different geometrical parameters of atomic force microscope cantilevers in critical force and time based on manipulation with applying EFAST sensitivity analyses," Modares Mechanical Engineering, vol. 15, no. 1, pp. 310-316, 2015. (in Persian)
[16] X. Deng, F. Xiong, X. Li, B. Xiang, Z. Li, X. Wu, C. Guo, X. Li, Y. Li, G. Li, W. Xiong, and Z. Zeng, "Application of atomic force microscopy in cancer research," Journal of nanobiotechnology, vol. 16, pp. 1-15, 2018.‏ https://doi.org/10.1186/s12951-018-0428-0
 [17] J. M. Northcott, I. S. Dean, J. K. Mouw, and V. M. Weaver, "Feeling Stress: The Mechanics of Cancer Progression and Aggression," Frontiers in Cell and Developmental Biology, Review vol. 6, (2018).
[18] M. Taheri, "Investigation of New Friction Models in Two-Dimensional Manipulation of Gastric Cancer Tissue," Journal Of Applied and Computational Sciences in Mechanics, vol. 35, no. 2, pp. 1-16, 2023. (in Persian)
[19] M. Taheri, "Investigation of different geometry of gold nanoparticles in the displacement of the second phase of three-dimensional manipulation using an AFM," Iranian Journal of Manufacturing Engineering, vol. 9, no. 8, pp. 1-11, 2022. (in Persian)
[20] M. Habibnejad Korayem and Z. Rastegar, "Development of 3D manipulation of viscoelastic biological cells by AFM based on contact models and oscillatory drag," Mechanics of Advanced Materials and Structures, vol. 28, no. 24, pp. 2572-2584, 2021.
[21] M. H. Korayem, M. Mozafari, Y. H. Sooha, and Z. Rastegar, "Development and application of rough viscoelastic contact models in the first phase of 3D manipulation for biological micro-/nanoparticles by AFM," Archive of Applied Mechanics, vol. 91, no. 9, pp. 3739-3753, 2021.
[22] M. H. Korayem and M. Zakeri, "The effect of off-end tip distance on the nanomanipulation based on rectangular and V-shape cantilevered AFMs," The International Journal of Advanced Manufacturing Technology, vol. 50, no. 5, pp. 579-589, 2010.
[23] J. E. Sader and C. P. Green, "In-plane deformation of cantilever plates with applications to lateral force microscopy," Review of scientific instruments, vol. 75, no. 4, pp. 878-883, 2004.
[24] Q. Li, G. Y. Lee, C. N. Ong, and C. T. Lim, "AFM indentation study of breast cancer cells," Biochemical and biophysical research communications, vol. 374, no. 4, pp. 609-613, 2008.
 
Send comment about this article
Enter Name.
Enter a valid email address.
Enter a vaid affiliation.
Enter comments (At leaset 10 words)
CAPTCHA Image
Enter Security Code Correctly.