Experimental and Numerical Investigation on Concrete Specimens with Expanded Metal Sheet under Impact Loading

Document Type : Original Article

Authors

1 Civil Engineering, Lorestan University, Khorramabad, Iran.

2 Mechanical Engineering, Lorestan University, Khorramabad, Iran.

Abstract

This investigation for all specimens the concrete with self-contact is used. The specimen has expanded metal sheets layers. The behavior of sheets is analyzed for specimens.  For experimental method the acceleration parameter are measured with the acceleration sensor. Drop hammer test machine had been used for experimental tests. For numerical method the ABAQUS software is used. Abaqus is used for dynamic test loading and it is suitable for dynamic loading. For the specimens with two and free fixed of area are investigated on experimentally. For the specimens with thin thickness the free fixed is used. The specimens without expanded metal sheet are collapsed under impact loading. The specimens with expanded metal sheet have a strong resistance for impact loading. The displacement of the specimens without expanded metal sheet is more than of the specimens with expanded metal sheet. Expanded metal sheets are simulated in the specimens with experimentally and numerically loading.

Keywords

Main Subjects


 
1. طاحونی، شاپور، "طراحی ساختمان های بتن مسل"، انتشارات دانشگاه  تهران، چاپ هفتم، )1383(.
2.    Hossain, M. M., Karim, M. R., Hasan, M., Hossain, M. K., Zain, M. F. M., "Durability of mortar and concrete made up of pozzolans as a partial replacement of cement: A review", Construction and Building Materials, Vol. 116. pp. 128–140, (2016).
3. لطیفی، محمد، "بررسی تحلیل نفوذ پرتابه‌های صلب در یک هدف بتنی پوشش‌دار"، پایان‌نامه کارشناسی‌ارشد، دانشگاه امام حسین، (1386).
4.    Beddar, M, "Development of steel fiber reinforced concrete from antiquity until the present day", Proceedings of the Conference Concrete: Constructions sustainable Option, Vol. 12, Dundee, UK, (2008)
5.    Teng, T. L., Chub, Y. A., Chang, F. A., Shen, B. C., Cheng, D. S., "Development and Validation of Numerical Model of Steel Fiber Reinforced Concrete for High Velocity Impact", Computational Materials Science, Vol. 42, pp. 90-99, (2008).
6.    Zhanga, M. H., Shimb, V. P. W., Lua, G., Chewa, C. W., "Resistance of high-strength concrete to projectile impact", International Journal of Impact Engineering, Vol. 31, pp. 825– 841, (2005).
7.    Song, P. S., Wu, J. C., Hwang, S., Sheu, B. C.,"Assessment of Statistical Variations in Impact Resistance of High-Strength Steel Fiber Reinforced Concrete", Cement and concrete research, Vol. 35, pp. 393-39, (2005).
8.    Kalantari, M., Rahim Nami, M., Hasan, K. M., "Optimization of composite sandwich panel against impact using genetic algorithm", Journal of optimization, Vol 21, pp. 123-138, (2009).
9.     رخشانی مهر، مهراله، بخشی، حسین، "بررسی تأثیر مقدار الیاف و رده مقاومت بر مشخصات مکانیکی بتن با الیاف فولادی"،  پایان نامه کارشناسی ارشد، گروه عمران، دانشگاه الزهرا، (1394).
10.   سزاری، مرتضی، دهقانی اشکذری، قاسم، "بررسی عملکرد ضربه‌ای بتن با مقاومت بالا و بتن فوق‌توانمند الیافی تحت برخورد پرتابه"، دانشگاه صنعتی ملک اشتر تهران، 1395، ص 348-337، (1395).
11.   واحدی، خداداد، "شبیه‌سازی رفتار دینامیکی بتن تحت بارگذاری ضربه‌ای"، بیستمین کنفرانس عمران سازه، دانشگاه تهران، اردیبهشت، (1387).
 
 
CAPTCHA Image