@article { author = {Ramezani, Mohammad Javad and Mohammadi, Meisam}, title = {Numerical And Experimental Investigation of deflection of Laminated composites due to drop weight of different projectiles}, journal = {Journal Of Applied and Computational Sciences in Mechanics}, volume = {33}, number = {2}, pages = {41-54}, year = {2022}, publisher = {Ferdowsi University of Mashhad}, issn = {2008-918X}, eissn = {2423-6519}, doi = {10.22067/jacsm.2022.74339.1078}, abstract = {In the present study, the effect of different projectiles on the carbon and glass fiber reinforced laminated composites is investigated experimentally and numerically. 8 samples of six-layers composite sheets with dimensions of 25×25 cm reinforced with glass and carbon fibers and epoxy resin3001 are subjected to low velocity impact. Also, spherical and semi-spherical steel projectiles of 680 grs weight and 55 mm diameters are used. Drop weight height of projectiles are supposed to be 1 and 1.5 m which leads to equivalent 6.7 and 10 J of impact energy. ANSYS and LSDYNA packages are used for numerical study. Results show that maximum deflection is occurred at the center of laminates for carbon and glass reinforced samples by the spherical projectiles. In addition, it is seen that deflection of carbon and glass laminated composites due to the impact of semi-spherical projectile reduces 18.7% and 34.3% respectively in comparison with the spherical projectile.}, keywords = {Low velocity impact,Plate deflection,Glass reinforced laminated composite,Carbon reinforced laminated composite,Numerical study}, title_fa = {بررسی عددی و تجربی خیز چندلایه های کامپوزیتی ناشی از ضربه سقوط آزاد پرتابه های مختلف}, abstract_fa = {در پژوهش حاضر اثر شکل پرتابه‌های مختلف بر پاسخ و خیز چند لایه‌های تقویت شده با الیاف شیشه و کربن به روش تجربی و عددی مورد بررسی قرار گرفته است. هشت نمونه از ورق‌های شش لایه کامپوزیتی به ابعاد 25×25 سانتی متر با الیاف شیشه و کربن و رزین اپوکسی 3001 تحت تست ضربه سرعت پایین قرار گرفته اند. همچنین از پرتابه‌های کروی و نیمه کروی فولادی با جرم 680 گرم و قطر 55 میلی متر استفاده شده است. ارتفاع سقوط آزاد پرتابه ها 1 و 5/1 متر در نظر گرفته شده است که منجر به ایجاد انرژی ضربه معادل 7/6 و 10 ژول شده است. برای حل عددی از بسته اجزاء محدود ANSYS و LS-DYNA استفاده شده است. نتایج نشان می دهد که بیشینه خیز در مرکز ورق برای هر دو نمونه کامپوزیتی تقویت شده با الیاف شیشه و کربن با پرتابه کروی رخ می دهد. همچنین مشاهده شد که خیز ورق های کامپوزیت تقویت شده با الیاف شیشه و کربن در اثر برخورد پرتابه نیمه کروی از ارتفاع 1 متر به ترتیب 3/34% و 7/18% در مقایسه با برخورد پرتابه کروی کاهش یافته است.}, keywords_fa = {ضربه سرعت پایین,خیز ورق,کامپوزیت تقویت شده با الیاف شیشه,کامپوزیت تقویت شده با الیاف کربن,حل عددی}, url = {https://mechanic-ferdowsi.um.ac.ir/article_42028.html}, eprint = {https://mechanic-ferdowsi.um.ac.ir/article_42028_2f8c70d8e868325d1b7bda3b9a720a3e.pdf} }