Numerical analysis of the obstacle effect with different geometry on the heat transfer of nanofluid flow in a rectangular channel

Document Type : Original Article

Authors

1 Faculty of Mechanical Engineering, University of Guilan, Rasht, Iran.

2 Department of mechanical engineering, Roudsar and Amlash branch, Islamic Azad University, Roudsar, Iran,

Abstract

In this study, investigated heat transfer of Nanofluid laminar flow in a channel with obstacles along different geometry such as triangular, rectangular and half-cylinder and the effect of adding Nano particles on based flow. The result showed that the average Nusselt number increased with an increasing volumetric fraction of nano particles. However, the increasing average Nusselt number is dependent on the type of obstacles geometry that rectangular shape is more than others, because area of heat transfer is more than other obstacles. The Nusselt number with rectangular geometry is 30% more than the Nusselt number with half-cylinder geometry. Also, using obstacles with different geometry and the adding of the nanoparticles, the hydraulic-thermal performance has been increased up to 44%. The local Nusselt number for nanofluid of volume fraction with 1% is 2.38% higher than volume fraction of nanofluid with 2%. The local Nusselt number of volume fraction of nano particle with 1% is 10% less than based fluid.

Keywords

Main Subjects

References

[1] S. Z. Heris, S. H. Noie, E. Talaii and J. Sargolzaei, “Numerical investigation of Al2O3/water nanofluid laminar convective heat transfer through triangular ducts,” Nanoscale Research Letters, vol. 6, no. 179, 2011. https://doi.org/10.1186/1556-276X-6-179
[2] S. Javad, A. H. Muhammad, H. bahar, M. S. Khan, M. M. Janjua, and M. A. Bashir, “Internal convective heat transfer of nanofluids in different flow regimes: A comprehensive review,” Physica A: Statistical Mechanics and its Applications, vol. 538, 2020. https://doi.org/10.1016/j.physa.2019.122783
[3] M. H. Esfe, M. Bahiraei, H. Hajbarati, and M. Valadkhani, “A comprehensive review on convective heat transfer of nanofluids in porous media: Energy-related and thermos hydraulic characteristics,” Applied Thermal Engineering, vol. 178, no. 1, pp. 115487, 2020.
 https://doi.org/10.1016/j.applthermaleng.2020.115487
[4] S. Dutta, N. Goswami, A. K. Biswas, and S. Pati, “Numerical investigation of magnetohydrodynamic natural convection heat transfer and entropy generation in a rhombic enclosure filled with Cu-water nanofluid,” International Journal of Heat and Mass Transfer, vol. 136, Pages 777-798, 2019.
 https://doi.org/10.1016/j.ijheatmasstransfer.2019.03.024
[5] M.R. Daneshvar-Garmroodi, A. Ahmadpour, and F. Talati, “MHD mixed convection of nanofluids in the presence of multiple rotating cylinders in different configurations: A two-phase numerical study,” International Journal of Mechanical Sciences, vol. 150, pp. 247-264, 2019.
https://doi.org/10.1016/j.ijmecsci.2018.10.037
[6] Y. Zheng, H. Yang, H. Mazaheri, and A. Aghaei, “An investigation on the influence of the shape of the vortex generator on fluid flow and turbulent heat transfer of hybrid nanofluid in a channel,” Journal of Therm Analysis and Calorimetry, vol. 143, no. 2, pp. 1425–1438, 2020.
https://doi.org/10.1007/s10973-020-09415-2
[7] H. Xie, J. Wang, T. Xi, Y. Liu, and F. Ai, “Thermal conductivity of suspension containing SiC particles,” Journal of materials science letters,” vol. 21, pp. 193-195, 2002. https://doi.org/10.1023/A:1014742722343
[8] Y. Xuan, and Q. Li, “Investigation on convective heat transfer and flow features of nanofluids,” Journal of Heat transfer, vol. 125, no. 1, pp. 151-155, 2003. https://doi.org/10.1115/1.1532008
[9] R. S. Vajjha, and D. K. Das, “Experimental determination of thermal conductivity of three nanofluids and development of new correlations,” International Journal of Heat and Mass Transfer,” vol. 52, no. 21-22, pp. 4675-4682, 2009. https://doi.org/10.1016/j.ijheatmasstransfer.2009.06.027
[10] S. M. Fotukian, and M. N. Esfahany, “Experimental study of turbulent convective heat transfer and pressure drop of dilute CuO/water nanofluid inside a circular tube,” International Communications in Heat and Mass Transfer, vol. 37, no. 2, pp. 214-219, 2010.
 https://doi.org/10.1016/j.icheatmasstransfer.2009.10.003
[11] S. Mirmasoumi, and A. Behzadmehr, “Numerical study of laminar mixed convection of a nanofluid in a horizontal tube using two-phase mixture model,” Applied Thermal Engineerin, vol. 28, no. 7, pp. 717–727, 2008. https://doi.org/10.1016/j.applthermaleng.2007.06.019
[12] E. B. Haghighi, A. T. Utomo, M. Ghanbarpour, A. I. T. Zavareh, H. Poth, R. Khodabandeh, A. Pacek, and B. E. Palm, “Experimental Study on Convective Heat Transfer of Nanofluids in Turbulent Flow: Methods of Comparison of Their Performance,” Experimental Thermal and Fluid Science, vol. 57, pp. 378–387, 2014. https://doi.org/10.1016/j.expthermflusci.2014.05.019
[13] B. Delac, A. Trp, and K. Lenic, “Numerical investigation of heat transfer enhancement in a fin and tube heat exchanger using vortex generators,” International Journal Heat Mass Transfer, vol. 78, no. 11, pp. 662–669, 2014. https://doi.org/10.1016/j.ijheatmasstransfer.2014.07.027
[14] M. T. Al-Asadi, F. S. Alkasmoul, and M. C. T. Wilson, “Heat transfer enhancement in a micro-channel cooling system using cylindrical vortex generators,” International Communications Heat and Mass Transfer, vol. 74, pp. 40–47, 2016. https://doi.org/10.1016/j.icheatmasstransfer.2016.03.002
[15] N. Zheng, P. Liu, F. Shan, J. Liu, Z. Liu, and W. Liu, “Numerical studies on thermohydraulic characteristics of laminar flow in a heat exchanger tube fitted with vortex rods,” International Journal of Thermal Sciences, vol. 100, pp. 448–456, 2016. https://doi.org/10.1016/j.ijthermalsci.2015.09.008
[16] B. Lotfi, B. Sundén, and Q. Wang, “An investigation of the thermo-hydraulic performance of the smooth wavy fin-and-elliptical tube heat exchangers utilizing new type vortex generators,” Applied Energy, vol. 162, pp. 1282–1302, 2016. https://doi.org/10.1016/j.apenergy.2015.07.065
[17] E. Ebrahimnia-Bajestan, M. C. Moghadam, H. Niazmand, W. Daungthongsuk, and S. Wongwises, “Experimental and numerical investigation of nanofluids heat transfer characteristics for application in solar heat exchangers,” International Journal of Heat and Mass Transfer, vol. 92, pp. 1041-1052, 2016. https://doi.org/10.1016/j.ijheatmasstransfer.2015.08.107
[18] C. M. Velte, M. O. L. Hansen, and V.L. Okulov, “Multiple vortex structures in the wake of a rectangular winglet in ground effect,” Experimental Thermal Fluid Science, vol. 72, pp. 31– 39, 2016.
 https://doi.org/10.1016/j.expthermflusci.2015.10.026
[19] K. Javaherdeh, and H. Karimi, “Numerical analysis of mix convection of sodium alginate non-Newtonian fluid with Al2O3 nanoparticle in a channel with block,” Journal of Applied and Computational Sciences in Mechanics, vol. 32, no. 1, pp. 93-110, 2021. https://doi.org/10.22067/jacsm.2021.40042
[20] O. A. Akbari, D. Toghraie, A. Karimipour, A. Marzban, G. R. Ahmadi, “The effect of velocity and dimension of solid nanoparticles on heat transfer in non-Newtonian nanofluid,” Physica E: Low-dimensional Systems and Nanostructures, vol. 86, pp. 68-75, 2017.
https://doi.org/10.1016/j.physe.2016.10.013
[21] B. H. Salman, H. A. Mohammed, and A. Sh. kherbeet, “Numerical and experimental investigation of heat transfer enhancement in a microtube using nanofluids,” International Communications in Heat and Mass Transfer, vol. 59, pp. 88–100, 2014. https://doi.org/10.1016/j.icheatmasstransfer.2014.10.017
 
Send comment about this article
CAPTCHA Image

Files

Share

How to cite

Statistics