1. MacCallion, H., Pham, D. T., "The analysis of a six-degree-of-freedom workstation for mechanized assembly", Proceeding of the 5th World Congress on Theory of Machines and Mechanisms, Montreal, Canada, July 8-13, (1979).
2. Hunt, K.H., "Structural Kinematics In-Parallel-Actuated Robot Arms", Journal of Mechanism, Transmissions, and Automation in Design, Vol. 105, pp. 705-712, (1983).
3. Briot, S., Arakelian, V.G. and Le Baron, J.P., "Shaking force minimization of high-speed robots via centre of mass acceleration control", Mechanism and Machine Theory, Vol. 57, pp. 1–12, (2012).
4. Arakelian, V.G. and Smith, M.R., "Shaking force and shaking moment balancing of mechanisms: a historical review with new examples", Mechanical Design, Vol. 127, pp. 334-339, (2005).
5. Arakelian, V.H. and Smith, M.R., "Design of planar 3-DOF 3-RRR reactionless parallel manipulators", Mechatronics, Vol. 18, pp. 601-606, (2008).
6. Agrawal, S.K. and Fattah, A., "Reactionless space and ground robots: novel designs and concept studies", Mechanism and Machine theory, Vol. 39, pp. 25-40, (2004).
7. Gosselin, C.M. and Laliberte, T., "Static balancing of spatial parallel platform mechanisms—revisited", ASME Journal of Mechanical Design, Vol. 122, pp. 43-51, (2000).
8. Chaudhary, K. and Chaudhary, H., "Dynamic balancing of planar mechanisms using genetic algorithm", Journal of Mechanical Science and Technology, Vol. 28, pp. 4213, (2014).
9. Van der Wijk, V. and Herder, J.L., "Synthesis method for linkages with center of mass at invariant link point—pantograph based mechanisms", Mechanism and machine theory, Vol. 48, pp. 15-28, (2012).
10. Alici, G. and Shirinzadeh, B., "Optimum force balancing with mass distribution and a single elastic element for a five-bar parallel manipulator", Proceedings of ICRA'03. IEEE International Conference on Robotics and Automation, Vol. 4, (2003).
11. Nehemiah, P., Rao, B.S.S. and Ramji, K., "Shaking force and shaking moment balancing of planar mechanisms with high degree of complexity", Jordan Journal of Mechanical and Industrial Engineering, Vol. 6, pp. 17-24, (2012).
12. Ricard, R. and Gosselin, C.M., "On the development of reactionless parallel manipulators", Proceedings of the ASME Design Engineering Technical Conference and Computers and Information in Engineering Conference, Baltimore, Maryland, US, September 10-14, (2000).
13. Papadopoulos, E. and Abu-Abed, A., "Design and motion planning for a zero-reaction manipulator", Proceedings of IEEE International Conference on Robotics and Automation, pp. 1554-1559, San Diego, USA, May 8-13, (1994).
14. Fattah, A. and Agrawal, S.K., "On the design of reactionless 3-DOF planar parallel mechanisms", Mechanism and Machine theory, Vol. 41, pp. 70-82, (2006).
15. Van der Wijk, V. and Herder, J.L., "Active dynamic balancing unit for controlled shaking force and shaking moment balancing", ASME 2010 International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), pp. 1515-1522, Montreal , Canada, August 15-18, (2010).
16. Arakelian, V. and Smith, M.R., "Shaking force and shaking moment balancing of mechanisms: a historical review with new examples", ASME Journal of Mechanical Design, Vol. 127, pp. 334-339, (2005).
17. Chung, W.K. and Cho, H.S., "On the dynamic characteristics of a balance PUMA-760 robot", IEEE Transactions on Industrial Electronics, Vol. 35, pp. 222-230, (1988).
18. Ebert-Uphoff, I. and Johnson, K., "Practical Considerations for the Use of Static Balancing for Parallel Kinematic Machines", IMechE Journal of Multi-body Dynamics: Part K, 216, pp. 73-85, (1997).
19. Russo, A., Sinatra, R. and Xi, F., "Static balancing of parallel robots", Mechanism and Machine Theory, Vol. 40, pp. 191-202, (2005).
20. Wijk, V. and Herder, J.L., "Guidelines for low mass and low inertia dynamic balancing of mechanisms and robotics", Advances in Robotics Research: Theory, Implementation, Application, Springer-Verlag Berlin Heidelberg, Berlin, (2009).
21. Briot, S., Arakelian, V., Sauvestre, N. and Baron, J.P., "Shaking forces minimization of high-speed robots via an optimal motion planning", ROMANSY 18 Robot Design, Dynamics and Control, Springer-Verlag Wien, (2010).
22. Briot, S. and Arakelian, V., "Complete shaking force and shaking moment balancing of in-line four-bar linkages by adding a class-two RRR or RRP Assur group", Mechanism and Machine Theory, Vol. 57, pp. 13-26, (2012).
23. Wu, Y. and Gosselin, C., "Design of reactionless 3-DOF and 6-DOF parallel manipulators using parallelepiped mechanisms", IEEE Transactions on Robotics, Vol. 21, pp. 821-833, (2005).
24. Alici, G. and Shirinzadeh, B., "Optimum force balancing of a planar parallel manipulator", Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 217, pp. 515-524, (2003).
25. Alici, G. and Shirinzadeh, B., "Optimum synthesis of planar parallel manipulators based on kinematic isotropy and force balancing", Robotica, Vol. 22, pp. 97-108, (2004).
26. Dresig, H. and Dien, N.P., "Complete shaking force and shaking moment balancing of mechanisms using a moving rigid body", Technische Mechanik, Vol. 31, pp. 121-131, (2011).
27. Arakelian, V., Briot, S., Yatsun, S. and Yatsun, A., "A new 3-DoF planar parallel manipulator with unlimited rotation capability", Proceedings of 13th World Congress in Robot and Machine Science, Guanajuato, Mexico, June 19-23, (2011).
28. Chaudhary, K. and Chaudhary, H., "Optimal dynamic balancing and shape synthesis of links in planar mechanisms", Mechanism and Machine Theory, Vol. 93, pp. 127-146, (2015).
29. Van Der Wijk, V., Krut, S., Pierrot, F. and Herder, J., "Generic method for deriving the general shaking force balance conditions of parallel manipulators with application to a redundant planar 4-RRR parallel manipulator", Proceedings of the 13th World Congress in Mechanism and Machine Science, Guanajuato, Mexico, June 19-23, (2011).
30. Van Der Wijk, V., Krut, S., Pierrot, F. and Herder, J.L., "Design and experimental evaluation of a dynamically balanced redundant planar 4-RRR parallel manipulator", The International Journal of Robotics Research, Vol. 32, pp. 744-759, (2013).
31. Arakelian, V. and Briot, S., "Balancing of linkages and robot manipulators: advanced methods with illustrative examples", Springer International Publishing Switzerland, (2015).
32. Van der Wijk, V. and Herder, J.L., "Dynamic balancing of Clavel’s Delta robot", Computational Kinematics. Springer, Berlin, Heidelberg, (2009).
33. Wampler, C.W., "On a rigid body subject to point-plane constraints", Journal of Mechanical Design, Vol. 128, pp. 151-158, (2006).
)
ارسال نظر در مورد این مقاله